Sony LBT-ZX66i Operating Instructions - Page 21

• To use an iPod, refer to the operating instructions of your iPod. • Sony cannot accept responsibility in the event that data recorded to iPod is lost or damage when using an iPod with this unit. • Some iPod operations may not be performed using buttons on the unit or remote. • Depending on the connected iPod, operations may differ. Other operations You can control your iPod with the following buttons on the remote or unit. To Do this Pause playback Press NX (or X on the remote). Press NX (or X on the remote) again to resume playback. Select a track or Press . or > chapter of repeatedly. audiobook/ podcast Fast forward or Hold down m or M fast rewind Play during playback, then release it at the point you want. Select the iPod menu item Press TOOL MENU or B or RETURN (or O RETURN on the remote). You can return to the previous menu or select a menu of the iPod. Note You can confirm menu and item selections on the iPod screen during operation Scroll up/down Press V/v repeatedly. the iPod menus Choose the select item Press ENTER (or b or on the remote). Tips • If you press NX while the system is turned off, the system turns on automatically and "iPod" function is selected. Then, playback starts if there is an iPod connected to the iPod dock (One Touch Play). However, depending on the status of the connected iPod, the iPod may not be playback. • The following buttons on the unit or remote have the similar function with the buttons on the iPod (except iPod Touch). Buttons on the unit or remote Buttons on the iPod which have similar function BX (or B or X on BX the remote) ./> ./> TOOL MENU or RETURN (or O RETURN on the remote) or B MENU ENTER (or on Center button. the remote) • Press and hold V or v on the unit or remote has the similar function of turning the Click Wheel on the iPod clockwise or counterclockwise. • Be sure that the iPod is not playing when using the One Touch Play. To use the system as a battery charger You can use the system as a battery charger for the iPod when the system is on or off. The charging begins when the iPod is placed on the iPod connector. The charging status appears in the iPod screen and when the system is off the display of the unit change to clock. For details, refer to the operating instructions of your iPod. To stop charging the iPod Remove the iPod. If you stop charging the iPod when the system is off, press DISPLAY repeatedly until the display is turned off (Power Saving mode). 21US Basic Operations