Sony LBT-ZX66i Operating Instructions - Page 27

Basic Operations Changing the spectrum analyzer display 1 Press AMP MENU repeatedly to select "SPECTRUM". The last selected spectrum appears in the display. 2 Press B or b repeatedly to select the setting you want. The display changes cyclically as follows: SPECTRUM 1 t SPECTRUM 2 t SPECTRUM 3 t SPECTRUM 4 t SPECTRUM OFF When X-ROUND mode is selected (LBT-ZX99i only) The display changes as follows: X-POSITION* y SPECTRUM OFF * The spectrum analyzer display will synchronize with the selected X-ROUND effect. 3 Press ENTER. Adjusting the brightness of the display 1 Press AMP MENU repeatedly to select "DIMMER". The last selected dimmer appears in the display. 2 Press B or b repeatedly to select the setting you want. The display changes cyclically as follows: DIMMER 1 t DIMMER 2 t DIMMER 3* * DIMMER 3 is the darkest. 3 Press ENTER. Changing the display mode Press DISPLAY repeatedly while the system is turned off. You can select the following display mode. Demonstration1) The display changes and the indicators flash even when the system is turned off. No display (Power Saving Mode)1)2) The display is turned off to conserve power. The timer and clock continue to operate. Clock The clock is displayed. The clock display automatically turns to Power Save Mode after a few seconds. However, the display returns to clock display when you connect an iPod.3) 1) When an iPod is connected, the display change to clock. If you remove the iPod, the display changes to Power Saving Mode after a few seconds. 2) You cannot perform the following operations during Power Saving Mode: - Setting the clock (page 16). - Changing the AM tuning interval (page 20). - Turning on the system by pressing the function buttons or BX. - Changing "CD POWER" setting (page 19). 3) The clock is displayed continuously while the iPod is being charged. To turn off the clock display, press DISPLAY (see "To stop charging the iPod" (page 21)). 27US