Sony LF-B1 Setting and Usage Guide for PSP™ System (for PSP firmware
Sony LF-B1 Manual
View all Sony LF-B1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony LF-B1 manual content summary:
- Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 1
-880-13(1) LocationFree Player Setting and Usage Guide for PSP™ (PlayStation®Portable) System This manual contains instructions for setting up the LocationFree Base Station for use with the PSP™ system. For full details on the LocationFree Base Station, refer to the Operating Instructions document - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 2
for TV or Videos 17 Creating Advanced Settings for the LocationFree Player 20 Advanced Base Station Settings 21 Opening the [Base Station Settings] Screen 21 Checking the Current Base Station Status 22 Basic Operations in the [Advanced Setup] Screen 22 Setting Up Your Internet Connection 23 - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 3
UPnP. If you use a router that does not support UPnP, you will need to enter advanced settings for the Base Station and the LocationFree Player (1 page 20, 1 page 21). To determine whether your router is UPnP compatible, refer to the instructions supplied with your router. z Tips • You cannot use - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 4
Up to Watch TV at Home This section describes the setup for using NetAV to watch TV at home. Turn on the Base Station For details about preparing the Base Station for use, refer to the Operating Instructions document supplied with the Base Station. Press the POWER button on the front panel of the - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 5
Settings for the LocationFree Player You can register your PSP™ system with the Base Station and make SETUP MODE button on the rear of the Base Station. With the Base Station turned on, press and hold the button until the SETUP MODE LED starts to blink. The setting screen for use of LocationFree - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 6
the Base Station. For detailed usage instructions, refer to "Watching TV or Videos on the LocationFree Player" (1 page 7). You can close the LocationFree Player by pressing the button. Go to page 17 and set the TV channels. To watch TV or videos away from home, proceed to "Using "Easy Setup" to - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 7
™ System You can display TV or videos on the PSP™ system's screen by starting the LocationFree Player from the home menu. Connecting to the Base Station From Inside Your Home 1 Check that the Base Station is turned on. 5 The TV screen is displayed. When a connection is established, the TV screen - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 8
connection for the public wireless LAN service to be used. Connection to the Base Station over the Internet begins. 5 The TV screen is displayed. When a connection is established, the TV screen is displayed. Watching TV or Videos on the LocationFree Player Note No connection will be established - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 9
TV. Connect Establishes a connection with the Base Station. Use if the connection with the Base Station is dropped while the LocationFree Player is in use. 2 Select an icon (1 page 17) Allows the user to adjust various Base Station settings. Rate (1 page 11) Allows the user to adjust the video rate - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 10
Watching TV or Videos on the LocationFree Player Using the Remote Control 1 Select from the control deck or DVD player that is connected to the Base Station using the onscreen remote control. For example, if you have a Sony-manufactured DVD player connected to the Base Station, you can display - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 11
or Videos on the LocationFree Player 1 Used to switch device Notes • Save remote control data in the following location on your Memory Stick Duo™: Type Zoom Full Screen Original in accordance with available bandwidth. When selecting a rate manually, a higher rate (a larger number) results in - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 12
Watching TV or Videos on the LocationFree Player z Tip Depending on the selected rate, the network connection may drop during the cutover to the new rate. Displaying Information About the Channel in Use 1 - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 13
(1 page 10) Changes the channel that is displayed Displays the home menu while displaying the image in the background Watching TV or Videos on the LocationFree Player 13 - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 14
on the following website. LocationFreeTV FAQ pages: http://www.sony.com/locationfree/faq/ Creating Settings to Watch TV Away From Home You need to do this setup before you go out. Setting Up the NetAV Function 1 Check that the Base Station is turned on. 2 Select from the control panel (1 page - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 15
appears when you log in to [Base Station Settings]. 6 Select [Easy Setup], and then press the button. The information required for the dynamic DNS is saved to the Base Station. z Tip Dynamic DNS is one of the network services used to connect to the Base Station from outside your home. By selecting - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 16
instructions on the NetAV Check screen and configure the necessary settings. The Base Station needs to be set up to use the NetAV function away from home. There are two setup types: [Easy Setup] and [Advanced Setup]. [Easy Setup To connect to the LocationFree Base Station from outside your home - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 17
LocationFree Player Setting Up the LocationFree Player and then try again. Also, check the connection between the Base Station and the connected device, and make sure the IR Blaster is Duo™ media. In this case, follow the on-screen instructions to save the data. 2 Select the channel for antenna - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 18
players that are connected to the Base Station. To adjust these settings, you must first save remote control data on Memory Stick Duo™ media (1 page 10). For information on connecting the IR blaster or other devices, refer to the Operating Instructions from the LocationFree Player control panel - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 19
the LocationFree Player 6 Select . For details on the remote control's mode, refer to the instructions supplied with the device in use. Notes • If you press the perform basic setup (1 page 5) for use of the PSP™ system's LocationFree TV feature. • Device registration on the Base Station • Creation - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 20
for the Dynamic DNS and the port number for the Base Station, refer to the Operating Instructions document supplied with the Base Station. Once you have adjusted all necessary settings, select [OK], and then press the button. The settings will be completed. Setting Up the LocationFree Player 20 - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 21
the time of purchase is printed on the sticker on the Base Station. The user name cannot be changed. 5 Select [Advanced Setup], and then press the button. [Advanced Setup] Opening the [Advanced Setup] Screen The [Advanced Setup] screen appears. 1 Select from the control panel (1 page 9), and then - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 22
] screen to check the current settings and status of the Base Station. [Setup Information] [Update] This section explains the operations common to each frame in the [Advanced Setup] screen. Advanced Base Station Settings To display the latest status, select [Update], and then press the button - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 23
to set, contact your ISP or refer to the instructions supplied with your modem or router. 1 Select whether to assign an IP address to the Base Station automatically using the DHCP function of your router or modem or to assign an IP address manually. If you select [Automatic IP Address Configuration - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 24
you performed "Easy Setup" (1 pages 14 to 16). This section explains how to make advanced settings for using the NetAV function. NetAV Settings Set the port of the Base Station when the NetAV ]. For details, refer to the instructions supplied with your router. Advanced Base Station Settings 24 - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 25
to the settings menu by selecting [Menu] from the left side of the screen, and then complete the settings (1 page 22). If [Setup Incomplete] appears in the NetAV Check screen, read the instructions on the NetAV Check screen and configure the necessary settings. Advanced Base Station Settings 25 - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 26
A to F, a to f) z Tip For details on WEP and WPA-PSK with TKIP, refer to "About Wireless Security" in the Important Safeguards document supplied with the Base Station. 4 Select this to confirm and save the information you have entered. Notes • When choosing encryption keys and pre-shared keys, you - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 27
, refer to the Operating Instructions document supplied with the Base Station. Using the Base Station as a wireless LAN access point You can use the Base Station as a wireless LAN access point. When using the Internet browser from the PSP™ system, if you select [LocationFree AP] from the network - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 28
the Base Station software to the latest version. 1 Display the [Base Station Settings] screen (1 page 21). 2 Select [Upgrade Base Station software], and then press the button. Data will be downloaded from the Internet, and the Base Station software will be updated. Follow the on-screen instructions - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 29
Other Trademarks • "LocationFree" and "Memory Stick Duo" are trademarks or registered trademarks of Sony Corporation. • " " and "PlayStation" are registered trademarks, and " " is a trademark of Sony Computer Entertainment Inc. • All other company names and product names mentioned here may be - Sony LF-B1 | Setting and Usage Guide for PSP™ System (for PSP firmware - Page 30
9:00 a.m. - 9:00 p.m. EST, Mon.-Fri. (English Only) LocationFree Web sites http://www.sony.com/locationfree/ http://www.sonystyle.ca/locationfree/ For questions about the PSP™ (PlayStation®Portable) system, contact SCEA Consumer Services: http://www.us.playstation.com/psp 1-800-345
Setting and Usage Guide
for PSP™ (PlayStation
®
Portable) System
This manual contains instructions for setting up the LocationFree Base Station for use with
the PSP™ system. For full details on the LocationFree Base Station, refer to the Operating
Instructions document created when installing the CD-ROM supplied with the LocationFree
product on your PC.
2-671-880-
13
(1)
LocationFree Player
© 2006 Sony Corporation
© 2006 Sony Computer Entertainment Inc.