Sony LF-B1 Setting and Usage Guide for PSP™ System (for PSP firmware - Page 5

Getting Started Creating Basic Settings for the LocationFree Player You can register your PSP™ system with the Base Station and make settings for connection to a wireless LAN. 3 Select [Start], and then press the button. 1 Turn on the WLAN switch of the PSP™ system. 2 Select under from the home menu, and then press the button. 4 Press the SETUP MODE button on the rear of the Base Station. With the Base Station turned on, press and hold the button until the SETUP MODE LED starts to blink. The setting screen for use of LocationFree TV is displayed. Press the right button to go to the next screen. The SETUP MODE LED blinks. z Tip To re-register your PSP™ system with the Base Station or to register your system with another Base Station, you must perform [Basic Settings] again (1 page 19). SETUP MODE LED Wait while the PSP™ system registers with the Base Station and the network settings required for establishing a connection are completed. This is an automatic process. 5