Sony LF-B1 Setting and Usage Guide for PSP™ System (for PSP firmware - Page 27

• Configuring the wireless settings on a computer connected to the Base Station over a wired LAN is recommended to ensure security. If creating settings for the Base Station from your computer, settings may differ from those on the PSP™ system. For details, refer to the Operating Instructions document supplied with the Base Station. Using the Base Station as a wireless LAN access point You can use the Base Station as a wireless LAN access point. When using the Internet browser from the PSP™ system, if you select [LocationFree AP] from the network connection, you can connect to the Internet from the PSP™ system through the Base Station. z Tip To use the Base Station as a wireless access point for computers, the computers must be equipped with integrated wireless LAN functions or wireless LAN cards that conform to the IEEE802.11a, b, or g standards. Other Settings Device Registration You can delete registration information for a device that is registered with the Base Station. z Tips • You need to use [Basic Settings] (1 page 5) to register your PSP™ system with the Base Station. For details about registering devices other than the PSP™ system, refer to the Operating Instructions document supplied with the Base Station. • You can register up to four devices (for example, up to four PSP™ systems) with the Base Station. Note It is not possible to watch TV or videos on more than one of the registered PSP™ systems or computers at the same time. (At any one time, only one of the devices may view TV or videos.) 1 A list of the devices currently registered with the Base Station appears here. 2 If you want to stop connecting to the Base Station from a registered device, select the check box for the device in "List of Registered Devices" and then select [Delete] by pressing the button. Advanced Base Station Settings 27