Sony LF-B1 Setting and Usage Guide for PSP™ System (for PSP firmware - Page 18

6 Save your settings. Press the button to save the channel information you entered on the PSP™ system. 4 Select [Video 1] or [Video 2] for the connected device you want to use the remote control for, and then press the button. Adjusting Settings for the Remote Control of a Connected Device You can adjust settings for the on-screen remote control that will be used to operate devices such as video decks or DVD players that are connected to the Base Station. To adjust these settings, you must first save remote control data on Memory Stick Duo™ media (1 page 10). For information on connecting the IR blaster or other devices, refer to the Operating Instructions document supplied with the Base Station. 1 Check that you have inserted Memory Stick Duo™ media that contains remote control data in the PSP™ system. z Tips • Under [Version Information], you can check the version number of the remote control data that is saved on the Memory Stick Duo™. • You can set only one remote control each for [Video 1] and [Video 2] in the PSP™ system. You cannot however set multiple remote controls for either setting. 5 Select the manufacturer of the connected device, and then press the right button. 2 Select from the LocationFree Player control panel (1 page 9), and then press the button. 3 Select [Remote Control Settings], and then press the button. The setting screen for the remote control is displayed. Setting Up the LocationFree Player 18