Sony LF-B1 Setting and Usage Guide for PSP™ System (for PSP firmware - Page 14

Watching TV or Videos Away From Home Watching TV or Videos Away From Home Using "Easy Setup" to Watch TV or Videos Away From Home This section explains how to set up your network to connect to your Base Station at home via public wireless LAN networks. Notes • You need to do this setup before you go out. • A contract or application may be required to connect to the Internet at some locations. Checking Your Internet Connection To watch TV or videos away from home, you must first connect the Base Station to the Internet. You can connect the Base Station to the Internet over a DSL line or cable Internet connection. z Tips • To use the NetAV function to watch TV or videos away from home, we recommend that the connection to the Base Station be broadband with upload and download speeds of at least 300 kbps. Contact your Internet service provider for more information about the speed of your communications line. • The faster line speeds you use, the better picture quality you get when you watch TV or videos using NetAV. Connecting to the router Using a network cable (not supplied), connect the LAN port of the Base Station to your router. (1 page 4) The connection method you should use depends on your ISP and equipment. For more information, contact your ISP. Notes • Depending on your Internet service provider, you may not be able to connect multiple devices, such as the Base Station and several computers. For more information, contact your service provider. • To determine what kind of network cable to use, refer to the instructions supplied with your router, cable modem, or DSL modem. • For details on setting up the connection, refer to the instructions supplied with your router, cable modem, or DSL modem. If you have any questions, contact your service provider. • Further information about configurations is also available on the following website. LocationFreeTV FAQ pages: http://www.sony.com/locationfree/faq/ Creating Settings to Watch TV Away From Home You need to do this setup before you go out. Setting Up the NetAV Function 1 Check that the Base Station is turned on. 2 Select from the control panel (1 page 9), and then press the button. 3 Select [Base Station Settings], and then press the button. The Internet browser is started and the Base Station Settings screen is displayed. Follow the on-screen instructions to complete the settings. 14