Sony LF-B1 Setting and Usage Guide for PSP™ System (for PSP firmware - Page 25

UPnP Settings You can enable or disable UPnP (Universal Plug and Play). If you are using a router that is compatible with UPnP, you do not need to adjust this setting. NetAV Check You can check whether NetAV has been set up correctly. 1 Select whether to enable or disable automatic router configuration (UPnP). When [Disable UPnP] is set, port forwarding needs to be set on the router. At the time of purchase, this is set to [Enable UPnP]. 2 Select this to save changes. z Tip For details about router settings, refer to the instructions supplied with your router. 1 When you select this button, a NetAV Check screen appears and the test begins. If [Success] appears in the test page, return to the settings menu by selecting [Menu] from the left side of the screen, and then complete the settings (1 page 22). If [Setup Incomplete] appears in the NetAV Check screen, read the instructions on the NetAV Check screen and configure the necessary settings. Advanced Base Station Settings 25