Sony PEG-SJ33 CLIE Handbook (primary manual) - Page 91
Setup, HotSync Manager shortcut, Local, Serial port, Infrared Monitor, Control Panel, Speed
View all Sony PEG-SJ33 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Performing the IR HotSync® operation 2 Click the HotSync icon in the Windows task tray again and select Setup from the HotSync Manager shortcut menu. The Setup window is displayed. 3 Click the Local tab. 4 Adjust the following settings as needed. • Serial port: Specifies a virtual port for an infrared port. If you are not sure of the connection port, refer to the Infrared Monitor in the Windows Control Panel. • Speed: Determines the speed at which data is transferred. Try the As Fast As Possible rate first, and adjust downward if you have any problems. 5 Tap OK. The IR HotSync® operation is enabled. Note When performing the local HotSync® operation with the USB cable and plug adapter after you set for the IR HotSync® operation, you need to restore the local HotSync settings. b For details, refer to "To restore the local HotSync settings" on page 92. Continued on next page Exchanging and updating data using the HotSync® operation (Other 91 HotSync® operations)