Sony PEG-SJ33 CLIE Handbook (primary manual) - Page 92

Performing the IR HotSync® operation Performing the IR HotSync® operation You can perform the IR HotSync® operation when you have prepared your computer setting, CLIÉ handheld setting and Conduit Setup. 1 Rotate the Jog Dial™ navigator to select [HotSync] icon on the Application Launcher screen and press the Jog Dial™ navigator. The HotSync screen is displayed. Tip You can also tap [HotSync] icon to display the HotSync screen. 2 Tap Local. 3 Tap the arrow V and select IR to a PC/Handheld. 4 Point the IR port of your CLIÉ handheld directly at the IR port of your computer. For best results, your CLIÉ handheld and your computer should be 4 to 8 inches (approximately 10 to 20 centimeters) apart, and the path between your CLIÉ handheld and your computer must be unobstructed. 5 Tap the HotSync icon. The HotSync® operation starts. The message will be displayed to note that the HotSync® operation is complete. To restore the local HotSync settings When performing the local HotSync® operation with the USB cable and plug adapter after you set for the IR HotSync® operation, you need to restore the local HotSync settings. 1 Connect your CLIÉ handheld and your computer. 2 Click the HotSync icon in the Windows task tray and select Local USB from the HotSync Manager shortcut menu. Exchanging and updating data using the HotSync® operation (Other 92 HotSync® operations)