Sony SLT-A35K Instruction Manual (Large File - 12.9 MB) - Page 179

Troubleshooting If you experience trouble with your camera, try the following solutions. Check the items on pages 179 to 187. Consult your Sony dealer or local authorized Sony service facility. 1 Check the following items. 2 Remove the battery pack, and insert the battery pack again after about one minute, and turn on the power. 3 Reset the settings (page 155). 4 Consult your Sony dealer or local authorized Sony service facility. Battery pack and power The battery pack cannot be installed. • As you insert the battery pack, use the tip of the battery pack to push the lock lever (page 21). • You can use an NP-FW50 battery pack only. Make sure that the battery is NP-FW50. The remaining battery indicator is incorrect, or sufficient remaining battery indicator is displayed but the power runs out too quickly. • This phenomenon occurs when you use the camera in an extremely hot or cold location (page 191). • The battery pack is discharged. Install a charged battery pack (page 19). • The battery pack is dead (page 24). Replace it with a new one. Cannot turn on the camera. • Install the battery pack correctly (page 21). • The battery pack is discharged. Install a charged battery pack (page 19). • The battery pack is dead (page 24). Replace it with a new one. 179 Others