Sony SLT-A35K Instruction Manual (Large File - 12.9 MB) - Page 28

• Do not hold by any part of the lens that protrudes when zooming or focusing. To remove the lens 1 Press the lens release button all the way in and turn the lens counterclockwise until it stops. 2 Attach the caps to the front and rear of the lens and the body cap to the camera. • Before you attach them, remove dust from them. • A rear lens cap is not supplied with the DT 18-55mm F3.5-5.6 SAM Lens Kit. When you store the lens without attaching it to the camera, purchase the Rear Lens Cap ALC-R55. Lens release button To attach a lens hood It is recommended that you use a lens hood to reduce flare and ensure maximum image quality. Fit the hood into the mount on the end of the lens barrel and rotate the hood clockwise until it clicks. • A lens hood is not included with the DT 18-55mm F3.5-5.6 SAM. You can use the ALC-SH108 (sold separately). • When using a built-in camera flash, make sure to remove the lens hood to avoid blockage of the flash light. • When storing, turn over the lens hood and place it onto the lens backwards. 28