Sony SLT-A35K Instruction Manual (Large File - 12.9 MB) - Page 181

The image is out of focus., The same image is shot several times.

Page 181 highlights

The shutter does not release. • You are using a memory card with a write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position. • Check the free capacity of the memory card (page 34). • You cannot record images while charging the built-in flash (page 99). • The shutter cannot be released when the subject is out of focus. • The lens is not attached properly. Attach the lens properly (page 27). • When the camera is attached to another device, such as an astronomical telescope, set [Release w/oLens] to [Enable] (page 150). • The subject may require special focusing (page 90). Use the focus-lock or manual focus function (pages 91, 94). Recording takes a long time. • The noise reduction function is turned on (page 147). This is not a malfunction. • You are shooting in RAW mode (page 141). Since the RAW data file is large, the RAW mode shooting may take time. • The Auto HDR is processing an image (page 110). The same image is shot several times. • The drive mode is set to [Continuous adv.] or [Bracket: Cont.]. Set it to [Single-shot Adv.] (page 119). • The exposure mode is set to Tele-zoom Continuous Advance Priority AE (page 72). • The exposure mode is set to AUTO+ and [Auto+ Image Extract.] is set to [Off] (page 63). The image is out of focus. • The subject is too close. Check the minimum focal distance of the lens. • You are shooting in manual focus mode, set the focus mode switch to AF (autofocus) (page 89). • When the focus mode switch is equipped with the lens, set it to AF. • Ambient light is insufficient. Eye-Start AF does not work. • Set [Eye-Start AF] to [On] (page 40). • Press the shutter button halfway down. 181 Others

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202

181
Others
The shutter does not release.
You are using a memory card with a write-protect switch, and the switch is
set to the LOCK position. Set the switch to the recording position.
Check the free capacity of the memory card (page 34).
You cannot record images while charging the built-in flash (page 99).
The shutter cannot be released when the subject is out of focus.
The lens is not attached properly. Attach the lens properly (page 27).
When the camera is attached to another device, such as an astronomical
telescope, set [Release w/oLens] to [Enable] (page 150).
The subject may require special focusing (page 90). Use the focus-lock or
manual focus function (pages 91, 94).
Recording takes a long time.
The noise reduction function is turned on (page 147). This is not a
malfunction.
You are shooting in RAW mode (page 141). Since the RAW data file is
large, the RAW mode shooting may take time.
The Auto HDR is processing an image (page 110).
The same image is shot several times.
The drive mode is set to [Continuous adv.] or [Bracket: Cont.]. Set it to
[Single-shot Adv.] (page 119).
The exposure mode is set to Tele-zoom Continuous Advance Priority AE
(page 72).
The exposure mode is set to AUTO+ and [Auto+ Image Extract.] is set to
[Off] (page 63).
The image is out of focus.
The subject is too close. Check the minimum focal distance of the lens.
You are shooting in manual focus mode, set the focus mode switch to AF
(autofocus) (page 89).
When the focus mode switch is equipped with the lens, set it to AF.
Ambient light is insufficient.
Eye-Start AF does not work.
Set [Eye-Start AF] to [On] (page 40).
Press the shutter button halfway down.