Sony STR DA2400ES Service Manual - Page 2

Continental European, East, European and Russian models - uk

Page 2 highlights

STR-DA2400ES/DG920 Amplifier section (DG920) Models of area code U, CA1) Minimum RMS Output Power (8 ohms, 20 Hz - 20 kHz, THD 0.09%) 100 W + 100 W Stereo Mode Output Power (8 ohms, 1 kHz, THD 0.7%) 110 W + 110 W Surround Mode Output Power2) (8 ohms, 1 kHz, THD 10%) 150 W per channel 1) Measured under the following conditions: Area code Power requirements U, CA 120 V AC, 60 Hz 2) Reference power output for front, center, surround and surround back speakers. Depending on the sound field settings and the source, there may be no sound output. Frequency response Analog Input Analog Digital (Coaxial) Digital (Optical) Output (Analog) AUDIO OUT SUBWOOFER Equalizer Gain levels 10 Hz - 100 kHz, ±3 dB (with sound field and equalizer bypassed) Sensitivity: 150 mV/50 kohms S/N3): 96 dB (A, 20 kHz LPF) Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) S/N: 100 dB (A, 20 kHz LPF) Voltage: 150 mV/1 kohms Voltage: 2 V/1 kohm ±10 dB, 1 dB step 3) INPUT SHOR FM tuner section Tuning range 87.5 - 108.0 MHz Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz AM tuner section (DA2400ES: US) Tuning range With 10-kHz tuning scale 530 - 1,710 kHz5) With 9-kHz tuning scale 531 - 1,710 kHz5) Antenna (aerial) Loop antenna (aerial) Intermediate frequency 450 kHz 5) You can change the AM tuning scale to either 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down TUNING MODE, press POWER on the receiver. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. AM tuner section (DA2400ES: AEP, ECE, UK) Tuning range Area code Tuning scale 10 kHz step 9 kHz step CEL, CEK, ECE - 531 kHz - 1,602 kHz Antenna (aerial) Loop antenna (aerial) Intermediate frequency 450 kHz AM tuner section (DG920) Tuning range Models of area code U, CA With 10-kHz tuning scale: 530 - 1,710 kHz4) With 9-kHz tuning scale: 531 - 1,710 kHz4) Antenna (aerial) Loop antenna (aerial) Intermediate frequency 450 kHz 4) You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down TUNING MODE, press POWER. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs/Outputs Video: 1 Vp-p, 75 ohms COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms PB/CB: 0.7 Vp-p, 75 ohms PR/CR: 0.7 Vp-p, 75 ohms 80 MHz HD Pass Through HDMI Video (DA2400ES) Input/Output (HDMI Repeater block) 640 × 480p@60 Hz 720 × [email protected]/60 Hz 1440 × [email protected]/60 Hz (pixel sent 2 times) 1280 × [email protected]/60 Hz 1920 × [email protected]/60 Hz 1920 × [email protected]/60 Hz 720 × 576p@50 Hz 1440 × 576p@50 Hz (pixel sent 2 times) 1280 × 720p@50 Hz 1920 × 1080i@50 Hz 1920 × 1080p@50 Hz 1920 × 1080p@24 Hz General (DA2400ES: US) Power requirements 120 V AC, 60 Hz Power output (DIGITAL MEDIA PORT) DC OUT: 5 V, 0.7 A MAX Power consumption 350 W Power consumption (during standby mode) 0.7 W (when "HDMI Control" and "RS-232C Control" are set to "OFF") Dimensions 17 × 6 1/4 × 15 3/8 inches (430 × 157.5 × 388 mm) (width/height/depth) including projecting parts and controls Mass (Approx.) 26 lb 15 oz (12.2 kg) General (DA2400ES: AEP, ECE, UK) Power requirements Area code Power requirements CEL, CEK, ECE 230 V AC, 50/60 Hz Power output (DIGITAL MEDIA PORT) DC OUT: 5 V, 0.7 A MAX Power consumption Area code Power consumption CEL, CEK, ECE 360 W Power consumption (during standby mode) 0.7 W (when "Control for HDMI" is set to "OFF") Dimensions 430 × 157.5 × 388 mm (width/height/depth) including projecting parts and controls Mass (Approx.) 12.5 kg General (DG920) Power requirements Area code U, CA Power requirements 120 V AC, 60 Hz Power output (DIGITAL MEDIA PORT) DC OUT: 5V, 0.7 A MAX Power consumption Area code U CA Power consumption 350 W 480 VA Power consumption (during standby mode) 0.7 W (When "Control For HDMI" is set to "OFF") Dimensions (width/height/depth) (Approx.) 17 × 6 1/4 × 15 inches (430 × 157.5 × 378 mm) including projecting parts and controls Mass (Approx.) 26 lb 1 oz (11.8 kg) Supplied accessories Operating Instructions Quick Setup Guide (1) GUI Menu List (1) Optimizer microphone (ECM-AC2) (1) FM wire antenna (aerial) (1) AM loop antenna (aerial) (1) AC power cord (mains lead) (1) (DA2400ES) Remote commander (RM-AAP023) (1) (DG920) Remote commander (RM-AAP024) (1) (DA2400ES: AEP, ECE, UK) Remote commander (RM-AAP025) (1) (DA2400ES: US) Remote commander (RM-AAU039) (1) (DA2400ES) R6 (size-AA) batteries (4 (DA2400ES) or 2 (DG920)) Design and specifications are subject to change without notice. • Abbreviation ECE : Continental European, East European and Russian models 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144

STR-DA2400ES/DG920
2
Ampli
er section (DG920)
Models of area code U, CA
1)
Minimum RMS Output Power
(8 ohms, 20 Hz – 20 kHz, THD 0.09%)
100 W + 100 W
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 0.7%)
110 W + 110 W
Surround Mode Output Power
2)
(8 ohms, 1 kHz, THD 10%)
150 W per channel
1)
Measured under the following conditions:
Area code
Power requirements
U, CA
120 V AC, 60 Hz
2)
Reference power output for front, center, surround and sur-
round back speakers. Depending on the sound
eld settings
and the source, there may be no sound output.
Frequency response
Analog
10 Hz – 100 kHz,
±3 dB
(with sound
eld and equalizer bypassed)
Input
Analog
Sensitivity: 150 mV/50 kohms
S/N
3)
: 96 dB (A, 20 kHz LPF)
Digital (Coaxial)
Impedance: 75 ohms
S/N: 100 dB (A, 20 kHz LPF)
Digital (Optical)
S/N: 100 dB (A, 20 kHz LPF)
Output (Analog)
AUDIO OUT
Voltage: 150 mV/1 kohms
SUBWOOFER
Voltage: 2 V/1 kohm
Equalizer
Gain levels
±10 dB, 1 dB step
3)
INPUT SHOR
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section (DA2400ES: US)
Tuning range
With 10-kHz tuning scale
530 – 1,710 kHz
5)
With 9-kHz tuning scale
531 – 1,710 kHz
5)
Antenna (aerial)
Loop antenna (aerial)
Intermediate frequency
450 kHz
5)
You can change the AM tuning scale to either 9 kHz or 10
kHz. After tuning in any AM station, turn off the receiver.
While holding down TUNING MODE, press POWER on the
receiver.
All preset stations will be erased when you change the tuning
scale. To reset the scale to 10 kHz (or 9 kHz), repeat the
procedure.
AM tuner section (DA2400ES: AEP, ECE, UK)
Tuning range
Area code
Tuning scale
10 kHz step
9 kHz step
CEL, CEK, ECE
531 kHz –
1,602 kHz
Antenna (aerial)
Loop antenna (aerial)
Intermediate frequency
450 kHz
AM tuner section (DG920)
Tuning range
Models of area code U, CA
With 10-kHz tuning scale:
530 – 1,710 kHz
4)
With 9-kHz tuning scale:
531 – 1,710 kHz
4)
Antenna (aerial)
Loop antenna (aerial)
Intermediate frequency
450 kHz
4)
You can change the AM tuning scale to 9 kHz or 10 kHz.
After tuning in any AM station, turn off the receiver. While
holding down TUNING MODE, press POWER. All preset
stations will be erased when you change the tuning scale. To
reset the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs/Outputs
Video:
1 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
P
B
/C
B
: 0.7 Vp-p, 75 ohms
P
R
/C
R
: 0.7 Vp-p, 75 ohms
80 MHz HD Pass Through
HDMI Video (DA2400ES)
Input/Output (HDMI Repeater block)
640 × 480p@60 Hz
720 × [email protected]/60 Hz
1440 × [email protected]/60 Hz (pixel sent 2 times)
1280 × [email protected]/60 Hz
1920 × [email protected]/60 Hz
1920 × [email protected]/60 Hz
720 × 576p@50 Hz
1440 × 576p@50 Hz (pixel sent 2 times)
1280 × 720p@50 Hz
1920 × 1080i@50 Hz
1920 × 1080p@50 Hz
1920 × 1080p@24 Hz
General (DA2400ES: US)
Power requirements
120 V AC, 60 Hz
Power output (DIGITAL MEDIA PORT)
DC OUT:
5 V, 0.7 A MAX
Power consumption
350 W
Power consumption (during standby mode)
0.7 W (when “HDMI
Control” and “RS-232C
Control” are set to “OFF”)
Dimensions
17 × 6 1/4 × 15 3/8 inches
(430 × 157.5 × 388 mm)
(width/height/depth)
including projecting parts and controls
Mass (Approx.)
26 lb 15 oz (12.2 kg)
General (DA2400ES: AEP, ECE, UK)
Power requirements
Area code
Power requirements
CEL, CEK, ECE
230 V AC, 50/60 Hz
Power output (DIGITAL MEDIA PORT)
DC OUT:
5 V, 0.7 A MAX
Power consumption
Area code
Power consumption
CEL, CEK, ECE
360 W
Power consumption (during standby mode)
0.7 W (when “Control for HDMI” is set to
“OFF”)
Dimensions
430 × 157.5 × 388 mm
(width/height/depth)
including projecting parts and controls
Mass (Approx.)
12.5 kg
General (DG920)
Power requirements
Area code
Power requirements
U, CA
120 V AC, 60 Hz
Power output (DIGITAL MEDIA PORT)
DC OUT:
5V, 0.7 A MAX
Power consumption
Area code
Power consumption
U
350 W
CA
480 VA
Power consumption (during standby mode)
0.7 W (When “Control For HDMI” is set
to “OFF”)
Dimensions (width/height/depth) (Approx.)
17 × 6 1/4 × 15 inches
(430 × 157.5 × 378 mm)
including projecting parts and controls
Mass (Approx.)
26 lb 1 oz (11.8 kg)
Supplied accessories
Operating Instructions
Quick Setup Guide (1)
GUI Menu List (1)
Optimizer microphone (ECM-AC2) (1)
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
AC power cord (mains lead) (1) (DA2400ES)
Remote commander (RM-AAP023) (1) (DG920)
Remote commander (RM-AAP024) (1) (DA2400ES: AEP, ECE,
UK)
Remote commander (RM-AAP025) (1) (DA2400ES: US)
Remote commander (RM-AAU039) (1) (DA2400ES)
R6 (size-AA) batteries (4 (DA2400ES) or 2 (DG920))
Design and speci
cations are subject to change without notice.
• Abbreviation
ECE
: Continental European, East
European and Russian models