Sony STR DA2400ES Service Manual - Page 21
History, Digital, Media, Software, Version, Display, Check
UPC - 027242729872
View all Sony STR DA2400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
STR-DA2400ES/DG920 HISTORY MODE The state that the set is used is memorized. Procedure: 1. While pressing the [MEMORY/ENTER] and [MUSIC] but- tons, press the [POWER] button to turn on the power and "HISTORY" is displayed. 2. Each time the [M] [m] key of remote commander is pressed, the item is switched in order as follows. Items Protector count Total single power on time Sound field Input function Input mode Digital select Stream information Signal configuration Headphones Volume Bass Treble Level FL/FR Level SL/SR Level CT/SW Level BL/BR Total power on time Muting Power on counter (Rebox test mode) Display COUNT XX SxxxxxHxxM xxxxxxxxxx xxxxxxxxxx xxxxxxxxxx xxxxxxxxxx xxxxxxxxxx CONF xxxxx HEADPH xxx VOL xxxxx BASS xxdB TREB xxdB FL/R xx xx SL/R xx xx C/SW xx xx BL/R xx xx T xxHxxM MUTING xxx REBOX xxxx DIGITAL MEDIA PORT TEST Procedure: 1. Connect the DMPORT check jig (P/N: J-2501-309-A) with the DMPORT jack (CN8003) on the MICON board. 2. While pressing the [MEMORY/ENTER] and [A.F.D.] buttons, press the [POWER] button to turn on the main power. 3. The message "DMPORT T." and "DMPORT OK"appears on the fluorescent indicator tube and enter the digital media port test mode. (Confirmation of communication line) When "NO DETECT", "UART NG" and "UART TO" are displayed on the fluorescent indicator tube, confirm the connection of the DMPORT check jig, and enter the mode again. Each time the [>] button on the remote commander is pressed, the connect check and adaptor version check are switched. Press the [.] button on the remote commander, connected confirmation of the DMPORT check jig is done again. 4. To a pinjack of the DMPORT check jig input information relevant to audio signal (sine-wave 1.0V rms) and composite video signal (white 100% 1.0Vp-p, color bar, etc.). 5. Confirm the output of speakers and monitor TV. (Confirmation of analog signal) 6. To release from this mode, press the [x] button on the remote commander. J001 MICON board CN8003 color pattern generator DMPORT check jig (Part No.: J-2501-309-A) set AF oscillator VIDEO board J6004 TV monitor FL/FR speaker MAIN board TM601 (DG920) TM602 (DA2400ES) SOFTWARE VERSION DISPLAY MODE The software version is displayed. Procedure: 1. While pressing the [TONE MODE] and [MUSIC] buttons, press the [POWER] button to turn on the main power. 2. The message "M.Ver X.XX" appears. Each time the [DISPLAY] button is pressed, "H.Ver X.XX", "V.Ver X.XX", "G.Ver X.XX", "F.Ver X.XX" and "S.Ver X.XX" this order, and returns to the "M.Ver X.XX" displayed. KEY CHECK MODE Button check Procedure: 1. While pressing the [MEMORY/ENTER] and the [MOVIE] buttons, press the [POWER] button to turn on the main power. 2. Either the message "REST 11" appears. Every pressing of any button other than the [POWER] counts down the buttons. The buttons which are already counted once are not counted again. When all buttons are pressed "REST 00" appears. 21