Sony VPL-HW20 Operating Instructions - Page 12
Improper use, Do not do any of the following while using, the projector.
View all Sony VPL-HW20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Improper use Do not do any of the following while using the projector. Blocking the ventilation holes (intake or exhaust) Ventilation holes (intake) Ventilation holes (exhaust) Tip For details on the location of the ventilation holes (intake or exhaust), see "Location of Controls" (1 page 7). Tilting front/rear and left/right 15° or more Avoid using the projector tilted at an angle of more than 15 degrees. Do not install the projector anywhere other than on a level surface or on the ceiling. Installing the projector in such a location may result in uneven color uniformity or reduce the reliability of the effects of the lamp. When installing the unit at altitudes When using the projector at an altitude of 1,500 m or higher, set "Cooling Setting" in the Setup menu to "High" (1 page 50). Failing to set this mode when using the projector at high altitudes could have adverse effects, such as reducing the reliability of certain components. 15° or more 15° or more 15° or more 12 15° or more WARNING When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket-outlet near the unit. If a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or disconnect the power plug.