Sony VPL-HW20 Operating Instructions - Page 61

On-screen display, Remote control, Symptom, Cause and Remedy

Get Sony VPL-HW20 PDF manuals and user guides View all Sony VPL-HW20 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Others Symptom The picture is too dark. The picture is not clear. The picture flickers. The color of characters or the picture is not appropriate. Cause and Remedy c Adjust the "Contrast" or "Brightness" of the Picture properly. (1 page 44) menu c Adjust the focus. (1 page 20) c Condensation has accumulated on the lens. Leave the projector for about 2 hours with the power on. c For pictures from a computer, activate "APA" and adjust the current input signal. c Adjust "Phase" for "Adjust Signal" in the Screen menu properly. (1 page 49) c Select the desired color registration in "Panel Alignment" of Installation menu (1 page 55). On-screen display Symptom Cause and Remedy On-screen display does not c Set "Status" in the Setup menu to "On." (1 page 50) appear. c Check if the ON/STANDBY indicator should light in green. The model name does not disappear from the screen. c The display mode of the projector may be set at the time of purchase. Consult with your local dealer or qualified Sony personnel. Input terminals do not appear. c Set "Auto Input Search" in the Function menu to "Off". (1 page 53) Remote control Symptom The remote control does not work. Cause and Remedy c Batteries could be weak. Replace them with new batteries. (1 page 10) c Insert the batteries with the correct polarities. (1 page 10) c If there is a fluorescent lamp near the remote control detector, the projector may work improperly or inadvertently. c Confirm the position of the remote control detector on the projector. (1 page 7) 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
61
Others
On-screen display
Remote control
The picture is too dark.
c
Adjust the “Contrast” or “Brightness” of the Picture
menu
properly. (
1
page 44)
The picture is not clear.
c
Adjust the focus. (
1
page 20)
c
Condensation has accumulated on the lens. Leave the projector
for about 2 hours with the power on.
The picture flickers.
c
For pictures from a computer, activate “APA” and adjust the
current input signal.
c
Adjust “Phase” for “Adjust Signal” in the Screen
menu
properly. (
1
page 49)
The color of characters or
the picture is not
appropriate.
c
Select the desired color registration in “Panel Alignment” of
Installation
menu (
1
page 55).
Symptom
Cause and Remedy
Symptom
Cause and Remedy
On-screen display does not
appear.
c
Set “Status” in the Setup
menu to “On.” (
1
page 50)
c
Check if the ON/STANDBY indicator should light in green.
The model name does not
disappear from the screen.
c
The display mode of the projector may be set at the time of
purchase. Consult with your local dealer or qualified Sony
personnel.
Input terminals do not
appear.
c
Set “Auto Input Search” in the Function
menu to “Off”. (
1
page 53)
Symptom
Cause and Remedy
The remote control does
not work.
c
Batteries could be weak. Replace them with new batteries.
(
1
page 10)
c
Insert the batteries with the correct polarities. (
1
page 10)
c
If there is a fluorescent lamp near the remote control detector, the
projector may work improperly or inadvertently.
c
Confirm the position of the remote control detector on the
projector. (
1
page 7)