Sony VPL-HW20 Operating Instructions - Page 58
Others, About the Control for HDMI
View all Sony VPL-HW20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Others This section describes about the other functions, how to solve the problems, how to replace the lamp and air filter, etc. About the Control for HDMI What is the Control for HDMI? Control for HDMI is an HDMI standard mutual control function which uses the HDMI CEC (Consumer Electronics Control) specification. By connecting a variety of Control for HDMI compatible equipment such as a hard disk Blu-ray Disc player, a DVD player/recorder, an AV amplifier, etc. to a Control for HDMI compatible TV or a projector with an HDMI cable, the equipment connected will synchronize with the TV or the projector when either is operated. Using the Control for HDMI function • Connect and assign the settings of each equipment appropriately. • Do not turn off the main power of the equipment. • Set the input setting of the projector to the HDMI input which the equipment is connected. • Check if the picture from the equipment appears appropriately on the projector. Connecting a Control for HDMI compatible equipment Use an HDMI cable to connect the projector and the Control for HDMI compatible equipment. Use a cable that has acquired the HDMI logo. Setting the Control for HDMI Be sure to assign the appropriate connections for both the projector and the Control for HDMI compatible equipment 58 connected to the projector. For settings of the projector, see page 52. For settings of the Control for HDMI compatible equipment connected to the projector, refer to its operational instructions. When a equipment that is compatible with the "Control for HDMI - Easy Setting" is connected to the HDMI input of the projector, if you turn the Control for HDMI function setting of the projector on, the Control for HDMI function setting of the connected equipment will also turn on. What you can do with the Control for HDMI • Basic operations (playback, stop, menu operations, etc.) of the connected equipment is available by using the remote control of the projector. • By turning on or playing back the connected equipment, the projector will turn on and the input setting will switch to the terminal of the connected equipment automatically. • By turning the power of the projector off, the power of the connected equipment will also turn off automatically. • By selecting equipment connected to the projector desired to operate with SYNC MENU button on the remote control of the projector, the power of the selected equipment will turn on and the input will switch to the terminal of the connected equipment automatically. • By changing the language setting of the projector, the language setting of the connected equipment will also change to the same language automatically. Notes • The available functions of the Control for HDMI differ depending on each equipment. Refer to the operating instruction of each equipment.