Sony VPL-HW20 Operating Instructions - Page 66
reaches the end, and then, and push it in securely until
View all Sony VPL-HW20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
3 Loosen the screw on the lamp cover with a Philips screwdriver, and then open the lamp cover. 5 Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 3 screws. 4 Loosen the 3 screws on the lamp with the Phillips screwdriver. Hold up the handle, then pull the lamp straight out. Note Be careful not to touch the optical block inside the unit. 6 Close the lamp cover, then tighten the screws. 66
66
3
Loosen the screw on the lamp
cover with a Philips screwdriver,
and then open the lamp cover.
4
Loosen the 3 screws on the
lamp with the Phillips
screwdriver. Hold up the handle,
then pull the lamp straight out.
5
Hold the handle of the new lamp
and push it in securely until it
reaches the end, and then
tighten the 3 screws.
Be careful not to touch the optical block
inside the unit.
6
Close the lamp cover, then
tighten the screws.
Note