Stihl FS 460 C-EM Product Instruction Manual - Page 24

002BA409 KN English N Pull up the spool housing - turn counterclockwise - approx. 1/6 turn - until it engages - and then allow it to spring back N Pull the ends of the line outward Repeat operation as needed until both ends of the line are approx. 13 cm long. A rotary movement from one click to the next releases approx. 4 cm of line. PolyCut Mowing Head Always switch off the engine to load the mowing head by hand - otherwise there is a risk of injury! Proceed as described in the mowing head information sheet. Attaching grass cutting blades, brush knives 4 3 2 1 b a With the grass cutting blade 255-8 (1), the cutting edges must face clockwise. Cutting attachments with 3 or 4 blades (2, 3) can face in any direction - turn over these cutting attachments periodically to avoid uneven wear. N Use the guard ring for mowing tools N Attach the deflector for metal mowing tools N Position cutting attachment (1) The collar (a) must engage the hole (b) in the cutting attachment! N Fit the thrust washer (2) - curvature faces upward N Position thrust plate (3) N Block the shaft N Screw on the nut (4) counterclockwise and tighten Remove the tool used to block the shaft. Removing cutting attachments N Block the shaft N Unscrew the nut clockwise A nut that moves too easily should be replaced. 22 FS 460 C-M, FS 460 C-M L