Stihl FS 460 C-EM Product Instruction Manual - Page 29
Balancing the, Trimmer/Brushcutter, Starting / Stopping the, Engine
View all Stihl FS 460 C-EM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Balancing the Trimmer/Brushcutter The machine will balance differently depending on the cutting attachment mounted. N Let the machine swing on the harness until it stops moving - change the connection point if necessary Hanging positions Putting down the machine in an emergency As soon as it becomes apparent that a dangerous situation is developing, the machine must be put down quickly. Practice setting down the machine quickly. In order to avoid damage, when practicing, do not throw the machine on the ground. English Starting / Stopping the Engine Controls 3 2 1 6BA009 KN 002BA392 KN Mowing heads, grass cutting blades and brush knives should rest lightly on the ground. Circular saw blades should "hover" approx. 8 in. (20 cm) above the ground. 6BA010 KN 1 Throttle trigger lockout 2 Throttle trigger 3 Stop switch with Run and Stop positions. Push the stop switch (h) to switch off the ignition. Function of stop switch and ignition system The stop switch is normally in the Run position: Ignition is on in this position - the engine is ready to start and may be started. The ignition is switched off when the stop switch is depressed. It is automatically switched on again after the engine comes to a standstill. FS 460 C-M, FS 460 C-M L 27