Stihl FS 460 C-EM Product Instruction Manual - Page 25

Attaching circular saw blades With circular saw blades, the cutting edges must face clockwise. For attaching circular saw blades, a limit stop set is available as a special accessory that contains a limit stop and a guard ring for circular saw blades. Change guard ring 3 4 5 N Remove guard washer (3) and thrust plate (4) N Remove guard ring (5) for mowing tools 002BA424 KN 681BA165 KN 4 7 6 N Attach guard ring (6) for circular saw blades N Push thrust plate (4) onto the shaft N Attach limit stop (7) for circular saw blades Do not use the guard washer (3) for circular saw blades. Mounting the cutting attachment 4 3 2 1 b a 002BA425 KN English N Fit the thrust washer (2) - curvature faces upward N Position thrust plate (3) A thrust plate (3) for sawing use, with which the entire cutting depth of the circular saw blade can be used, is available as a special accessory. N Block the shaft N Screw on the nut (4) counterclockwise and tighten Remove the tool used to block the shaft. Removing cutting attachments N Block the shaft N Unscrew the nut clockwise A nut that moves too easily should be replaced. 002BA423 KN N Position cutting attachment (1) The collar (a) must engage the hole (b) in the cutting attachment! FS 460 C-M, FS 460 C-M L 23