Stihl FS 460 C-EM Product Instruction Manual - Page 4

English Guide to Using this Manual Pictograms The meanings of the pictograms attached to or embossed on the machine are explained in this manual. Depending on the model concerned, the following pictograms may be on your machine. Fuel tank for gasoline and engine oil mixture Press to operate decompression valve Manual fuel pump Symbols in Text Many operating and safety instructions are supported by illustrations. The individual steps or procedures described in the manual may be marked in different ways: N A bullet marks a step or procedure. A description of a step or procedure that refers directly to an illustration may contain item numbers that appear in the illustration. Example: N Loosen the screw (1). N Lever (2) ... In addition to the operating instructions, this manual may contain paragraphs that require your special attention. Such paragraphs are marked with the symbols and signal words described below: Engineering Improvements STIHL's philosophy is to continually improve all of its products. As a result, engineering changes and improvements are made from time to time. Therefore, some changes, modifications and improvements may not be covered in this manual. If the operating characteristics or the appearance of your machine differs from those described in this manual, please contact your STIHL dealer for assistance. Press to operate manual fuel pump Danger! Indicates an imminent risk of severe or fatal injury. Filler hole for gear lubricant Air intake summer mode Warning! Indicates a hazardous situation which, if not avoided, could result in severe or fatal injury. Air intake winter mode Handle heating Caution! Indicates a risk of property damage, including damage to the machine or its individual components. 2 FS 460 C-M, FS 460 C-M L