TEAC 2488neo 2488neo Owner's Manual - Page 111
MIDI Program Change messages, Scene memory Program Change messages
View all TEAC 2488neo manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
15 − Appendix Effect chain # Effect 4 Wah (WAH) 5 Delay (DLY) NRPN 00 15 00 16 00 17 00 18 00 19 00 20 00 21 00 22 00 23 00 24 00 20 00 26 00 21 00 27 00 28 Parameter Attack Sense (reserved) (reserved) Switch Time Feedback Hi Damp Mix Level Type Time-L Time-R Feedback-L Feedback-R Threshold Values 1 - 100 = 0.1 - 10.0 (Hz) 0 - 100 = 0 - 100 0, 1 = Off, On 0 - 1000 = 0 - 1000 (ms) 0 - 100 = 0 - 100 0 - 100 = 0 - 100 0 - 100 = 0 - 100 0 - 6 = OFF, Normal. Pan, Stereo, FB Mod, Gate, Reverse 0 - 1000 (ms) *If type is Stereo only 0 - 1000 = 0 - 1000 (ms) *If type is Stereo only 0 - 100 = 0 - 100 *If type is Stereo only 0 - 100 = 0 - 100 *If type is Stereo only 0 - 100 = 0 - 100 *If type is Gate only MIDI Program Change messages The 2488neo can accept Program Change messages to select an effect and to change scenes. Before a Program Change message is sent for changing an effect, a Bank Select message must be sent to select whether an effect will be selected from the preset bank or from the user bank of memories. In each case, bank 0 corresponds to the preset memories, and bank 1 to the user bank. Send the Bank Select messages (CC 0) on MIDI channels 1 through 8 for mic effects (see below), MIDI channel 9 for stereo dynamics, channel 10 for the single effect, and channel 11 for the multi effect. When selecting a mic effect, a Bank Select message should first be sent on channel 14 to select the group of eight channels or inputs out of which the channel is selected: Bank 0: Mixer channels 1 though 8 Bank 1: Mixer channels 9 through 16 Bank 2: Mixer channels 17 through 24 Bank 3: Inputs A through H The Program Change messages that are then valid are as follows (see the tables following for details of the preset values-the "user" messages correspond to the entry number in the library): Mic effects (preset) Program Change 0 to 3 Mic effects (user) Program Change 0 to 99 (maximum) Stereo dynamics effect (preset) Program Change 0 to 1 Stereo dynamics effect (user) Program Change 0 to 99 (maximum) Single effect (preset) Program Change 0 to 6 Single effect (user) Program Change 0 to 99 (maximum) Multi effect (preset) Program Change 0 to 31 Multi effect (user) Program Change 0 to 99 (maximum) ªª Scene memory Program Change messages These are transmitted on channel 16. The Program Change message may be from 0 to 99. 111 TASCAM 2488neo