TEAC 2488neo 2488neo Owner's Manual - Page 119
No. Message, Meaning, Action, NO/EXIT, YES/ENTER, REPEAT, PITCH/SSA
View all TEAC 2488neo manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
15 − Appendix No. Message No tracks have been armed. Arm 18 at least one track. Meaning Action Before an auto-punch operation, you must have Press NO/EXIT and press the REC key of at at least one armed track. least one track on which you will be recording (once a track has been armed in auto-punch, the track arming status cannot be changed). Press [EXIT]. Non-linear Digital audio input mode has been selected, Press NO/EXIT and check the digital audio audio detected. but the 2488neo has detected the wrong data source. The 2488neo expects a signal in S/ 19 Check your system set-up format for the incoming digital audio to be used. PDIF (IEC60958 Consumer use) format at 44.1 kHz. It cannot accept compressed audio formats, etc. Press [EXIT]. Not enough free Copying a song has failed because there is not Press NO/EXIT and use one of the SONG disk space. Use enough space on the selected or target partition. menu operations such as DELETE UNUSED or 20 DELETE UNUSED to make space. ERASE to free up some space on the partition where there is not enough space (these opera- tions cannot be undone). Press [EXIT]. Not enough free Sometimes after repeated operations, the inter- Press NO/EXIT. Use the DELETE UNUSED memory. Use nal memory of the 2488neo becomes used, and menu item from the SONG menu. As well as 21 DELETE UNUSED to free memory. recording, etc. is not possible. deleting the unused song data, this action will also free up memory, so recording can continue. Remember that this operation Press [EXIT]. cannot be undone. Not enough room on Too much data has been selected to fit onto the Press YES/ENTER to change the CD for CD for burn. Use CD that is currently loaded. another one, or NO/EXIT to cancel the current 22 another CD [YES] or cancel [NO]. operation. Use a higher-capacity disc when burning a master track or exporting data, or one of the same capacity as the current disc when backing up. Not enough room No enough space on the hard disk to create the Press NO/EXIT and create space by deleting on hard disk for image file necessary to create a CD. songs, etc., (SONG->ERASE) backing them up 23 this operation. if necessary (this operation cannot be undone). You can free up space on a partition other than Press [EXIT]. the current partition (use the DISK->SELECT function) in order to create space for the image. Protected song. Recording, track editing, recording, titling, etc. Press NO/EXIT, and use the PROTECT menu Unprotect with cannot be carried out when the current song item from the SONG menu to remove the 24 SONG PROTECT. has been protected. protection from the song before proceeding. Press [EXIT]. Repeat mode is selected. 25 Cannot do this operation now. Because repeat mode is selected, the following Press NO/EXIT and cancel the repeat mode functions cannot take place: locate operation, (REPEAT key) before proceeding with the track editing, undo/redo, auto punch, quick operation that produced this message. routing, all menu operations, and shutdown. Press [EXIT]. SSA mode is selected. 26 Cannot do this operation now. Because SSA mode is selected, the following functions cannot take place: MTC slave operations, jog and trim functions, recording (including auto-punch) and digital input. Press NO/EXIT and cancel the SSA mode (PITCH/SSA key) before proceeding with the operation that produced this message. Press [EXIT]. 119 TASCAM 2488neo