TEAC 2488neo 2488neo Owner's Manual - Page 120
other than LAST TAKE LOAD. Takes recorded, CD. Check
View all TEAC 2488neo manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
15 − Appendix No. Message Time between IN and OUT is too 27 short. Re-set the points. Meaning Action Repeat playback or auto-punch operations Press NO/EXIT, and re-enter or edit the IN and cannot be carried out because the time between OUT points so that the time between them is the IN and OUT locate markers is too short. longer, before attempting the operation again. Press [EXIT]. Too many locate markers. Use DELETE MARK to 28 delete some markers. More than 999 markers have been set in the Press NO/EXIT, and use the DELETE key song and so a new marker cannot be entered. from the home screen to delete some of the unwanted marks. Press [EXIT]. Too many songs to Copying a song has failed because there are Press ENTER. Back up any songs you want continue with this too many songs already on the selected or to keep, and then use the ERASE menu item 29 operation. target partition. from the SONG menu to erase unwanted songs, or songs you have backed up before Press [ENTER]. proceeding with the song copy (deleting songs cannot be undone). Too many songs. There are too many songs stored on the current Press NO/EXIT. Back up any songs you want Use SONG ERASE partition (the limit is 250 songs on one partition) to keep, and then use the ERASE menu item to delete songs for a new song to be created, or a song that has from the SONG menu to erase unwanted 30 you don't need. been backed up to be restored. songs, or songs you have backed up before proceeding with the creation or restoration of Press [EXIT]. a song (deleting songs cannot be undone). Alternatively, use DISK -> SELECT to select another partition. Too many takes. The repeat auto-punch procedure can't Press NO/EXIT, stop recording, select the Can't continue continue because more than 99 takes have desired take from the list. Press ENTER and 31 recording been recorded. press AUTO PUNCH again, selecting a mode other than LAST TAKE LOAD. Takes recorded Press [EXIT]. before this cannot be restored, so the first selection should be made carefully! Track already Because at least one track is already present on Press NO/EXIT and replace the disc if necessary. written to disc the disc, it is not possible to burn more than one 32 so only 1 song can be written. track at once. To burn several tracks at one time (Disc At Once), you must start with a blank disc. Press [EXIT]. Track is too short. Choose and set another OUT point. 33 Press [EXIT]. Wrong type of CD. Check the disc. 34 Press [EXIT]. The mixdown function cannot be applied Using the mixdown function a master track because the recording range for the master can be recorded from 00:00:00:00 to the OUT track has not been set or the length is shorter point. than allowed. The OUT point can be set by pressing the OUT key while holding down the LOCATE key. Moreover, a master track must be at least 4 seconds long in order to burn it to a CD. Set the OUT point to 00:00:04:00:0 or later (the IN point is not effective when using the mixdown function). The wrong type of CD for the operation has Press NO/EXIT and replace the disc with the been loaded in the drive. This could be because correct type of disc for the operation. : A non-writable CD has been selected for writ- ing. An attempt has been made to finalize an already finalized disc. An attempt has been made to erase a non-CD-RW disc. A disc which is not a backup disc has been loaded for a restore operation. 120 TASCAM 2488neo