TEAC 2488neo 2488neo Owner's Manual - Page 23
Rear panel, Sends Program Change and Control Change, MMC
View all TEAC 2488neo manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3 − Names and functions of the 2488neo Rear panel 12 w q 0 3 4 567 8 9 11POWER switch Turn the 2488neo power ON and OFF. Follow shut down procedures before turning power OFF (see "Shut down" on page 13). 22~ IN jack Connect the included power cord. 33MIDI OUT jack Sends Program Change and Control Change, MMC commands, realtime messages (such as MTC), common messages and other MIDI messages to connected MIDI devices. 44MIDI IN jack Receives Program Change and Control Change messages, MMC commands and other MIDI commands and messages, from connected MIDI devices. 55DIGITAL IN jack Use this jack to receive an S/PDIF digital audio signal, which can then be used as a pair of channel inputs (see "Digital input assignment" on page 29). 66DIGITAL OUT jack Outputs the stereo bus signal as an S/PDIF format digital audio signal. 77MONITOR OUT (L, R) jacks Outputs the signal selected in the top panel monitor section through these standard balanced 1/4" jacks. 88STEREO OUT (L, R) jacks Outputs stereo bus signal. 99EFFECT SENDS (1, 2) jacks Output effect sends signals 1 and 2. 0 MIC/LINE (A-D) jacks Analog input jacks for inputs A-D. These balanced jacks accept both XLR connectors and standard 1/4" plugs. q MIC/LINE (E-H) jacks Analog input jacks for inputs E-H. These balanced jacks accept standard 1/4" plugs. w USB port Use this port to connect the 2488neo to a computer using USB to exchange files, including audio files and settings, with an attached computer. 23 TASCAM 2488neo