TEAC 2488neo 2488neo Owner's Manual - Page 117

15 − Appendix Warning and status messages The following is a list of warning messages that may be displayed by the 2488neo, together with a note of their possible cause, and the actions you can take when they occur. In the messages, keys to be pressed are enclosed in brackets ([YES/ENTER] or [NO/EXIT]) and menu items are written in uppercase/capital letters (DELETE UNUSED). No. Message Cannot do this when not 1 stopped. Stop the transport. Meaning Action The hard disk is being accessed for playback Press NO/EXIT, stop the transport and retry or recording, so the selected action cannot the operation. be performed. Press [EXIT]. Cannot find digital input. 2 Check your system set-up. Press [EXIT]. Can't duplicate to the same 3 track as the source. Digital audio input mode has been selected, Press NO/EXIT and check the digital connec- but the 2488neo cannot detect a valid digital tion. If the connection is good, it is possible audio input. that the signal is the wrong type. The 2488neo expects a signal in S/PDIF (IEC60958 Consumer use) format at 44.1 kHz. It cannot accept compressed audio formats, etc. When editing tracks, you have selected the Press NO/EXIT and select a different source or same track as both source and destination for a destination track as appropriate. duplicate operation. Press [EXIT] Digital input is selected. 4 Cannot do this operation now. Because digital audio input is selected, the Press NO/EXIT and turn off digital input (the following functions cannot take place: Tuner, MIXER section of the PREFERENCES menu) pitch and SSA functions, MTC slave operations, before proceeding with the operation that jog and trim functions, audio CD operations). produced this message. Press [EXIT]. Disc is already blank. Can't 5 erase it. An attempt has been made to erase a disc (CD-RW) that is already blank. Press NO/EXIT and replace the disc if necessary. Press [EXIT]. Disc is blank. Can't finalize 6 this disc. An attempt has been made to finalize a blank Press NO/EXIT and replace the disc if disc (CD-R or CD-RW). necessary. Press [EXIT]. File too big to import. Choose 7 another file for import. The selected WAV or Standard MIDI File cannot Press NO/EXIT and delete a song (SONG be imported into the current song as there is not -> DELETE) to free up space on the partition enough disk space on the current partition. (note that this cannot be undone). Press [EXIT]. File too big to export. Choose another file 8 for export. Press [EXIT]. The data selected for export to the FAT partition Press NO/EXIT, use the USB OPEN function is too big (there is not sufficient space on the to manage the files (move or delete unwanted FAT partition). ones) on the FAT partition from a computer and retry. Alternatively, if there is no wanted data on the FAT partition, use the 2488neo to reformat the FAT partition (all data on the FAT partition is irrecoverably lost). The maximum file size is 4 GB. 117 TASCAM 2488neo