TEAC DR-05 DR-05 Owner's Manual - Page 46
Setting the input functions, Press the MENU button to open the, Screen.
View all TEAC DR-05 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
4-Recording Setting the input functions 1 Press the MENU button to open the MENU Screen. 2 Use the + or − button to select REC SETTING, and press the Á button. REC SETTINGscreen appears. The following input settings are made in this screen. Use the  or ¯ button or the + or − button to select the following settings. MIC POWER: When connecting a microphone that requires plug-in power, set this to ON. The factory default is OFF. 46 TASCAM DR-05 LOW CUT: The factory default setting of the low cut filter is OFF, but you can also select 40Hz, 80Hzor 120Hzas the cut-off frequency for a low cut filter. CAUTION • Set MICPOWERto OFFwhen using the built-in mic or connecting a dynamic microphone or microphone with a built-in battery. If set to ON, the plug-in power may damage such microphones. • Use headphones to monitor when you are recording with a microphone. If you use speakers to monitor, the sound output from the speakers may also be recorded, causing a poor recording and even feedback. NOTE MICPOWERand LOWCUTcan be set when recording/in recording standby. TIP The LOW CUT filter can reduce noise such as offensive wind noise from air-conditioners and projectors.