TEAC DR-05 DR-05 Owner's Manual - Page 49
button is used to adjust, the input level. Press the, button to show a pull-up menu screen
View all TEAC DR-05 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
4-Recording 2 The  or ¯ button is used to adjust the input level. Press the  or ¯ button to show a pull-up menu screen for input level setting. If the input is too high, the PEAK indicator on the upper left above the display lights. A ¶ mark is provided at -12dB on the level meters. Set the input level so that the indicator bars move to and fro with this mark at about the center without causing the PEAK indicator to light red when the loudest sounds occur. NOTE • Press the standby. (HOME) [ª] button to exit recording • When in recording standby or during recording, the speaker does not output sound even if the SPEAKER setting is enabled. Connect headphones to the /LINE OUT jack if you want to adjust the level or record while monitoring the input. Use the + or − button in the Home Screen to adjust the monitoring volume. This does not affect the sound to be recorded. TASCAM DR-05 49