TP-Link T1500-28PCT T1500-28PCTTL-SL2428PUN V3 User Guide - Page 30

Accessing the Switch Web Interface Access 2.3 Disable the Web Server You can shut down the HTTP server and HTTPS server to block any access to the web interface. Go to SECURITY > Access Security > HTTP Config, disable the HTTP server and click Apply. Figure 2-5 Shut down HTTP server Go to SECURITY > Access Security > HTTPS Config, disable the HTTPS server and click Apply. Figure 2-6 Disbale the HTTPS Server 2.4 Change the Switch's IP Address and Default Gateway If you want to access the switch, you can configure the system IP address of the switch. If you want the switch to accss a network, you can configure the default gateway of the switch. Only the computers in the management VLAN can access the management interface of the switch. By default, VLAN 1 owning all the ports is the management VLAN and you can access the switch via any port. By default, the system IP address is 192.168.0.1, and the switch has no default gateway. The following example shows how to change the system IP address and default gateway of the switch, 1) Go to SYSTEM > System Info > System IP. Specify the management VLAN ID. Specify the IP address mode as Static. Enter the new IP address, subnet mask and default gateway. Make sure that the route between the host PC and the switch's new IP address is available. Click Apply. User Guide 7