TP-Link T1500-28PCT T1500-28PCTTL-SL2428PUN V3 User Guide - Page 41

Accessing the Switch Command Line Interface Access If you need to keep he configurations after the switch reboots, please user the command copy running-config startup-config to save the configurations in the start-up configuration file. Switch(config)#end Switch#copy running-config startup-config 3.7 Change the Switch's IP Address and Default Gateway If you want to access the switch, you can configure the system IP address of the switch. If you want the switch to accss a network, you can configure the default gateway of the switch. Only the computers in the management VLAN can access the management interface of the switch. By default, VLAN 1 owning all the ports is the management VLAN and you can access the switch via any port. By default, the system IP address is 192.168.0.1, and the switch has no default gateway. The following example shows how to configure the switch's IP address as 192.168.0.10/24 and configure the default gateway as 192.168.0.100. Switch#configure Switch(config)#interface vlan 1 Switch(config-if)#ip address 192.168.0.10 255.255.255.0 gateway 192.168.0.100 The connection will be interrupted and you should telnet to the switch's new IP address 192.168.0.10. C:\Users\Administrator>telnet 192.168.0.10 User:admin Password:admin Switch>enable Switch#copy running-config startup-config User Guide 18