TP-Link T1500-28PCT T1500-28PCTTL-SL2428PUN V3 User Guide - Page 540

Configuring Access Security Access Security Configurations Step 3 Step 4 Step 5 show user configuration Verify the configuration of access control. end Return to privileged EXEC mode. copy running-config startup-config Save the settings in the configuration file. The following example shows how to set the type of access control as IP-based. Set the IP address as 192.168.0.100, set the subnet mask as 255.255.255.0, and select snmp, telnet, http and https to apply the Access Control rule. Switch#configure Switch(config)#user access-control ip-based enable Switch(config)#user access-control ip-based 192.168.0.100 255.255.255.0 snmp telnet http https Switch(config)#show user configuration User authentication mode: IP based Index IP Address Access Interface 1 192.168.0.100/24 SNMP Telnet HTTP HTTPS Switch(config)#end Switch#copy running-config startup-config 2.2.2 Configuring the HTTP Function Follow these steps to configure the HTTP function: Step 1 Step 2 Step 3 configure Enter global configuration mode. ip http server Enable the HTTP function. By default, it is enabled. ip http session timeout minutes Specify the Session Timeout time. The system will log out automatically if users do nothing within the Session Timeout time. minutes: Specify the timeout time, which ranges from 5 to 30 minutes. The default value is 10. User Guide 517