TP-Link T1500-28PCT T1500-28PCTTL-SL2428PUN V3 User Guide - Page 613

Configuring ACL ACL Configuration EtherType Specify the EtherType to be matched using 4 hexadecimal numbers. User Priority Specify the User Priority to be matched. Time Range Select a time range during which the rule will take effect. The default value is No Limit, which means the rule is always in effect. The Time Range referenced here can be created on the SYSTEM > Time Range page. Logging Enable Logging function for the ACL rule. Then the times that the rule is matched will be logged every 5 minutes and a related trap will be generated. You can refer to Total Matched Counter in the ACL Rules Table to view the matching times. 2) In the Policy section, enable or disable the Mirroring feature for the matched packets. With this option enabled, choose a destination port to which the packets will be mirrored. Figure 2-5 Configuring Mirroring 3) In the Policy section, enable or disable the Redirect feature for the matched packets. With this option enabled, choose a destination port to which the packets will be redirected. Figure 2-6 Configuring Redirect Note: In the Mirroring feature, the matched packets will be copied to the destination port and the original forwarding will not be affected. While in the Redirect feature, the matched packets will be forwarded only on the destination port. User Guide 590