TP-Link T1500-28PCT T1500-28PCTTL-SL2428PUN V3 User Guide - Page 71

Managing System User Management Configurations Step 4 Step 5 end Return to privileged EXEC mode. copy running-config startup-config Save the settings in the configuration file. 3.2.2 Configuring Enable Password Follow these steps to create an account of other type: Step 1 Step 2 configure Enter global configuration mode. Use the following command to create an enable password unencrypted or symmetric encrypted. enable admin password { [ 0 ] password | 7 encrypted-password } Create an Enable Password. It can change the users' access level to Admin. By default, it is empty. 0: Specify the encryption type. 0 indicates that the password you entered is unencrypted, and the password is saved to the configuration file unencrypted. By default, the encryption type is 0. password: It is a string with 31 characters at most, which can contain only English letters (casesensitive), digits and 17 kinds of special characters. The special characters are 7: Specify the encryption type. 7 indicates that the password you entered is symmetric encrypted, and the password is saved to the configuration file symmetric encrypted. encrypted-password: Enter a symmetric encrypted password with fixed length, which you can copy from another switch's configuration file. After the encrypted password is configured, you should use the corresponding unencrypted password to reenter this mode. Step 3 Use the following command to create an enable password unencrypted or MD5 encrypted. enable admin secret { [ 0 ] password | 5 encrypted-password } Create an Enable Password. It can change the users' access level to Admin. By default, it is empty. 0: Specify the encryption type. 0 indicates that the password you entered is unencrypted, but the password is saved to the configuration file MD5 encrypted. By default, the encryption type is 0. password: It is a string with 31 characters at most, which can contain only English letters (casesensitive), digits and 17 kinds of special characters. The special characters are 5: Specify the encryption type. 5 indicates that the password you entered is MD5 encrypted, and the password is saved to the configuration file MD5 encrypted. encrypted-password: Enter a MD5 encrypted password with fixed length, which you can copy from another switch's configuration file. After the encrypted password is configured, you should use the corresponding unencrypted password to reenter this mode. show user account-list Verify the information of the current users. User Guide 48