TP-Link T1500-28PCT T1500-28PCTTL-SL2428PUN V3 User Guide - Page 826

 Figure 6-12 Configuring the Alarm Entries Configuration Example 5) Click to save settings. 6.4 Using the CLI ■■ Configuring Storm Control on ports Configure the Storm Control on the required ports of Switch A. For detailed configuration, refer to Configuring QoS. ■■ Configuring SNMP 1) Enable SNMP and specify the remote engine ID. Switch_A#configure Switch_A(config)#snmp-server Switch_A(config)#snmp-server engineID remote 123456789a 2) Create a view with the name View; set the MIB Object ID as 1 (which represents all functions), and the view type as Include. Switch_A(config)#snmp-server view View 1 include 3) Create a group of SNMPv3 with the name of nms-monitor. Enable Auth Mode and Privacy Mode, and set both the Read and Notify views as View. Switch_A(config)#snmp-server group nms-monitor smode v3 slev authPriv read View notify View 4) Create an SNMP user named admin. Set the user as a remote user and configure the security model and security level based on the group. Set the Auth Mode as SHA algorithm, password as 1234, the Privacy Mode as DES, and password as 1234. Switch_A(config)#snmp-server user admin remote nms-monitor smode v3 slev authPriv cmode SHA cpwd 1234 emode DES epwd 1234 5) To configure Notification, specify the IP address of the NMS host and UDP port. Set the User, Security Model and Security Level according to configurations of the SNMP User. User Guide 803