TRENDnet TFM-560E Manual - Page 49
Extended “AT\\” (Back Slash) Command Set
View all TRENDnet TFM-560E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
&V &W &Zn=x * View active file and stored phone numbers Store active configuration into the modem's NVRAM Store telephone number n=0 to 3 x= see also the dial modifier in "ATDn" command The max. number of digits per string is 40. Manufacturer default Extended "AT\" (Back Slash) Command Set Command \Jn \Nn \Qn \Tn \Vn Options \J0 * \J1 \N0 \N1 \N2 \N3 * \N4 \Q0 \Q1 \Q3 * n=0 * n=1 - 255 \V0 \V1 * Function & Description Constant DTE speed option DCE and DTE rates are independent Force the DTE interface speed to the DCE connection rate (line speed) after on-line Error control mode options Buffered mode, no error control (flow control is allowed). Direct mode, no error control (no flow control is allowed). MNP reliable mode. If MNP 2-4 error control establishment fails, the modem disconnects. V.42, MNP or buffer mode. The modem attempts to connect in V.42 mode. If this fails, the modem attempts to connect in MNP mode. If this fails, the modem connects in buffer mode. V.42 or disconnect. The modem attempts to connect in V.42 mode. If this fails, the call will be disconnected. Local flow control options Disable flow control (same as "AT&K0") XON/XOFF software flow control (same as "AT&K4") RTS/CTS hardware flow control (same as "AT&K3") Set inactive timer (for buffer mode only) Disable inactive timer Enable inactive timer. Length in minutes Protocol result codes Disable protocol result code appended to DCE speed Enable protocol result code appended to - 46 -