TRENDnet TFM-560E Manual - Page 53

1 - 255 35 - 59 S8= 0 - 65 S10= 1 - 255 S11= 50 - 150 S12= 0 - 255 S28= 0 - 255 S30= 0 - 90 S37= 0 2 3 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 S38= For international version 050 For Japanese version 050 Set the time, in seconds, that the modem 002 must pause when the "," dial modifier is encountered in the dial string Set the length of time, in tenths of a 020 second, that the modem waits before hanging up after a loss of carrier DTMF duration and inter digit delay. 144 Set the duration and spacing, in miniseconds, in DTMF touch tine dialing Define the maximum period, in 2- 050 hundredths of a second, allowed between consecutive asynchronous escape character "+" (plus) for the escape sequence to be considered valid V.34 modulation en-/disabler 001 0: disabled 1- 255: enabled Inactivity timer. Set the length of time, 000 in minutes, that the modem counts when there is no data flow in or out the DTE serial port. A connection is disengaged when the counter reaches the preset value. Set S30 =0 to disable the inactivity timer. For buffer mode only. Desired DCE speed (line speed) 000 Maximum modem speed Attempt 1200/75 bps connection Attempt to a 300 bps connection Attempt to a 1200 bps connection Attempt to a 2400 bps connection Attempt to a 4800 bps connection Attempt to a 7200 bps connection Attempt to a 9600 bps connection Attempt to a 12000 bps connection Attempt to a 14400 bps connection Attempt to a 16800 bps connection Attempt to a 19200 bps connection Attempt to a 21600 bps connection Attempt to a 24000 bps connection Attempt to a 26400 bps connection Attempt to a 28800 bps connection Attempt to a 31200 bps connection Attempt to a 33600 bps connection 56K Dial Line Rate Options. Set the 000 - 50 -