Texas Instruments TINSPIRE Getting Started - Page 19
Adding wireless adapters or cradles manually
View all Texas Instruments TINSPIRE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
4. Highlight each wireless adapter or wireless cradle you want to add, and click Add. To add all of the wireless clients listed in the Available Wireless Clients column, click Add All. Note: If the adapter or cradle does not appear in the Available Wireless Clients column after 6 minutes, try these tips: • Check the ID numbers of the wireless adapters or cradles to see which ones are not connecting. • Detach and reattach the wireless adapter or wireless cradle to the handheld. • Verify that the cradle is locked. (The lock on the back of the cradle is in the ON position.) 5. When all of the adapters and cradles are added, click Finish. Adding wireless adapters or cradles manually When you add a wireless adapter or cradle manually, it immediately appears in the TI-Nspire™ Network Manager window. 1. Click Manually Add Wireless Client(s). The Add Wireless Clients by ID Number dialog box displays. Wireless network adapter ID Cradle ID 2. For each wireless adapter or cradle you are adding, identify the ID number on the back of the adapter or cradle, and enter it in the Wireless Client ID box. The ID is six digits. Setting up the TI-Nspire™ Navigator™ Teacher Software 13