Toshiba 26HF66 User Manual - Page 21
Image tilt correction, Adding channels to the TV's memory - specifications
View all Toshiba 26HF66 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Important Safeguards Welcome to Toshiba Connecting your TV Using the Remote Control Image tilt correction When you install or change the direction of the TV, the picture may become tilted (caused by the Earth's magnetism). If this happens, use the image tilt correction feature to obtain the best possible picture. To adjust the image tilt: 1. Press MENU, then press or until the SETUP menu appears. 2. Press ▲ or ▼ to highlight IMAGE TILT. 3. Press or to adjust the picture tilt (from -10 to 10). SETUP I M AG E T I LT 0 SIGNAL METER :SELECT :ADJUST Adding channels to the TV's memory When you press CHANNEL ▲/▼ on the TV or CH M/? on the remote control, your TV will stop only on the channels you have programmed into the TV's channel memory. Follow the steps below to program channels into the channel memory. Programming channels automatically Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory automatically, you can add or erase channels manually. To add channels automatically: 1. Press MENU, then press or to display the SETUP menu. 2. Press ▲ or ▼ until the TV/CABLE selection is highlighted. 3. Press or to highlight either TV or SETUP LANGUAGE CLOCK SET TV / CABLE CH PROGRAM ADD / ERASE ENGLISH TV / CABLE CABLE, depending on which you use. If you use an antenna, choose :SELECT :ADJUST TV. If you use cable, choose CABLE. 4. Press ▼ until the CH PROGRAM selection is highlighted. 5. Press or to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message "PROGRAMMING NOW-PLEASE WAIT" appears. 6. When channel programming is complete, the message "COMPLETED" appears. 7. Press CH M or ? to view the programmed channels. Adding and erasing channels manually After you have programmed the channels automatically, you can add or erase specific channels manually. To add or erase channels manually: 1. Press MENU, then press or to dis- play the SETUP menu. 2. Press ▲ or ▼ until the ADD/ERASE selection is highlighted. 3. Press or to display the ADD/ SETUP LANGUAGE CLOCK SET TV / CABLE CH PROGRAM ADD / ERASE ENGLISH CABLE ERASE menu. 4. Press ▲ or ▼ to select ADD/ERASE, :SELECT :ADJUST then press . 5. Press ▲ or ▼ to select the desired channel to be added or erased. Press or to select ADD or ERASE, whichever function you want to perform. 6. Repeat step 5 for other channels you want to add or delete, then press ENTER. 7. Press EXIT to return to the normal screen. To add a digital channel you are watching: Select a channel you want to add. Press ▲ or ▼ to select ADDING CHANNEL in step 4 above, then press . To erase all channels from the channel memory: Press ▲ or ▼ to select CLEAR ALL in step 4 above, then press . All channels are erased from the channel memory. (You can still use the Channel Numbers on the remote control to tune a channel.) 21 Channel Numbers Channel M/? Menu/Enter Exit Note: You can add the channel manually (see "Adding and erasing channels manually," below). Setting up your TV Using the TV's Features Appendix J3W60321A_En_p15-22 21 27/2/06, 9:54 AM