Toshiba 52XV545U Owner's Manual - English - Page 16
Connecting an HDMI, or DVI device, to the HDMI input
UPC - 022265001790
View all Toshiba 52XV545U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
52XV545U_EN.book Page 16 Monday, August 4, 2008 10:54 AM Chapter 2: Connecting your TV Connecting an HDMI™ or DVI device to the HDMI input The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (HighBandwidth Digital-Content Protection) program material in digital form from EIA/CEA-861-D- compliant[1] consumer electronic devices (such as a settop box or DVD player with HDMI or DVI output). The HDMI input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 73. Supported Audio format: Linear PCM, sampling rate 32/44.1/48 kHz Note: • To connect a PC to the HDMI input, see page 19. • Some legacy HDMI sources may not work properly with your HDMI TV, due to the adoption of new standards. Please try setting the following three options (Lip-Sync Latency, Deep Color, x.v.Color) to Off. Your legacy HDMI source should operate properly with your TV. See page 73. To connect an HDMI device, you will need: • one HDMI cable (type A connector) per HDMI device - For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ). - To display an 1080p/60Hz signal format, you will need a High Speed HDMI cable. Conventional HDMI/DVI cable may not work properly. - HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration). - See "Setting the HDMI™ audio mode" (- page 39). TV upper back panel TV right side panel HDMI device VIDEO AUDIO L R IN IN OUT L R HDMI OUT To view the HDMI device video: Select the HDMI 1, HDMI 2, HDMI 3, or HDMI 4 video input source on the TV.* * To select the video input source, press INPUT on the remote control (- page 42). To program the TV remote control to operate other devices, see Chapter 3. To connect a DVI device, you will need: • one HDMI-to-DVI adapter cable (HDMI type A connector) - For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m). • one 3.5mm Stereo to RCA Y-Cable - An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration). - See "Setting the HDMI™ audio mode" (- page 39). TV upper back panel DVI device VIDEO AUDIO L R IN IN DVI / HDCP OUT OUT L R Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: • When turning on your electronic components, turn on the TV first and then the HDMI or DVI device. • When turning off your electronic components, turn off the HDMI or DVI device first and then the TV. [1]EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of highdefinition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. 16 XV545U (E/F) Web 177.8:228.6