Toshiba 52XV545U Owner's Manual - English - Page 49
Using the FREEZE feature, Adjusting the picture
UPC - 022265001790
View all Toshiba 52XV545U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
52XV545U_EN.book Page 49 Monday, August 4, 2008 10:54 AM Chapter 6: Using the TV's features Using the FREEZE feature To use the FREEZE feature: 1 When viewing the TV, press B to make the picture a still picture. 2 To return to the moving picture, press B again (or any other button). Note: If the TV is left in FREEZE mode for more than 15 minutes, the FREEZE mode will automatically be released and the TV will return to moving picture. Using the FREEZE function for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Adjusting the picture Selecting the picture mode You can select your desired picture settings from the following modes, as described below. Mode AutoView Sports Standard Movie PC PC Fine Preference Picture Quality Automatically adjusts picture settings based on ambient light conditions and input signal content Bright and dynamic picture Standard picture settings Lower contrast for darkened room Designed for viewing of PC tables and documents Designed for viewing of media from a Toshiba REGZA LINK PC. Your personal preferences Note: • PC mode is available for HDMI and PC inputs only (grayed out for other input sources). • PC Fine mode is only available when on an HDMI input with Enable REGZA LINK set to On and a Toshiba REGZA LINK PC connected (- page 61). • Because the AutoView mode automatically adjusts picture settings based on ambient light conditions and input signal content, most items in the Picture Settings and Advanced Picture Settings menus are grayed out when it is selected. 1 From the Video menu, highlight Mode and press T. 2 PanredssprBesosrTb.to select the picture mode you prefer Note: The picture mode you select affects the current input only. You can select a different picture mode for each input. Adjusting the picture quality You can adjust the picture quality (Contrast, Backlight, DynaLight™, Brightness, Color, Tint, and Sharpness) to your personal preferences. Selection Pressing C Pressing c Contrast Backlight* lower darker higher lighter DynaLight** On/Off On/Off Brightness Color darker paler lighter deeper Tint Sharpness reddish softer greenish sharper * Backlight This feature adjusts the brightness of the entire screen. When in video mode and no signal is input, this will automatically be set to 0. (Settings are stored in memory.) ** DynaLight This function automatically strengthens the black coloring of dark areas in the video according to the level of darkness. To adjust the picture quality: 1 From the Video menu, highlight Picture Settings and press T. 2 Press B or b to select the picture quality you want to adjust (Contrast, Backlight, DynaLight, Brightness, Color, Tint, or Sharpness), and then press C or c to adjust the setting, as described in the table above. 3 To save the new settings, highlight Done and press T. You can use any of the picture modes (- "Selecting the picture mode," above left) as a starting point for adjusting the picture settings. To revert back to the base mode that you began adjusting the picture settings from, highlight Reset and press T. The picture qualities you adjusted are automatically saved in the Preference mode (- "Selecting the picture mode," above left) until Reset is selected. 49 XV545U (E/F) Web 177.8:228.6