Toshiba 55L6200U User Guide - Page 57
Cancel, Timing Control, IR Blaster Setup screen.
View all Toshiba 55L6200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Initial Setup and Menu 57 IR Blaster Setup NOTE If Audio is selected as the device type, the volume option is active. However if another device (other than Audio) is selected, then this option is not available and grayed out. 10 After setting up all the options for the device, it is important to test the IR Blaster's control of the device by using the Test option. 11 Once you have selected all the appropriate information on the screen, use the ( / arrow) buttons to select the Done button. To cancel this screen and return to the previous screen, select the Cancel button. To test the IR Blaster's control of the device: 1 Use the ( / arrow) buttons to select the Test option from the IR Blaster Setup screen. The TV will then send the power on and power off command to the device through the IR Blaster with approximately a 5 second interval. 2 A message screen will appear asking you "Was your device powered on and off by the IR Blaster? If not, please check your device and IR blaster position." If the test failed, a "Test Failed" message will appear on the screen. To set up the timing control for your device: 1 Use the ( / arrow) buttons to select Timing Control. A screen will appear allowing you to set up the Interval Time for the device. NOTE The Timing Control is activated when the Guide Control is set for the TV. 2 Use the ( / arrow) buttons to select from the following options: ❖ 0.125 sec ❖ 0.25 sec (this is the default) ❖ 0.375 sec ❖ 0.5 sec ❖ 0.625 ❖ 0.75 ❖ 0.875