Toshiba MW24FM3 Owners Manual - Page 17

suogoeuuo3 Sonnecting to optional equipment You can enjoy high quality dynamic sounds of DVD video discs or audio CDs by connecting the unit to optional audio equipment. For details of output sound, see 58). : Front speaker : Rear speaker : Sub woofer El : Center speaker : Signal flow Connecting to an amplifier equipped with a Dolby Digital decoder Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the unit to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1 r Manufactured under license from Dolby Laboratories. "Dolby" "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights reserved. -channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark. • Use DVD video discs encoded via the Dolby Digital recording Amplifier equipped with a • Dolby Digital decoder system. • Make the following setting. To COAXIAL type digital audio input 75 S2 coaxial cable On-screen display "Audio Out Select" Recording system Select: "Bitstream" DO D Page iI 63) [58) Connecting to an amplifier equipped with Dolby Pro Logic Surround Dolby Pro Logic Surround You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers). • With an amplifier equipped with Dolby Digital Connect the equipment the same way as described in "Connecting to an amplifier equipped with a Dolby Digital decoder." Refer to that amplifier's owner's manual and set the amplifier so you can enjoy Dolby Pro Logic Surround sound. • Make the following setting. On-screen display Select: Page • With an amplifier not equipped with Dolby Digital Connect the equipment as follows. "Audio Out Select" "Analog 2ch" 61 I63) Amplifier equipped with Dolby Pro Logic Surround To audio input To ANALOG AUDIO OUT Audio cable Be sure to set "Audio Out Select" to "Analog 2ch" when you enjoy sounds of Dolby Pro Logic Surround using this connection. Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers. Connecting to an amplifier equipped with a DTS decoder Digital Theater Systems (DTS) DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs. Amplifier equipped with a DTS decoder "DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc. • Use DVD video discs or audio CDs encoded via the DTS recording system. • Make the following setting. On-screen display Select: Page To COAXIAL type digital audio input 75 0 coaxial cable "Audio Out Select" Recording system "Bitstream" DTS Ii 71) 63) jitT), 17