Toshiba MW24FM3 Owners Manual - Page 26

TV operation Thner setting This unit is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the unit's memory. In addition to normal VHF and UHF channels, this unit can receive up to 113 Cable TV channels. To 1,4 use this unit with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV 1,3 mode. 13 TV/CATV selection Setting channels automatically Preparation: • Press TVNCR to select the TVNCR mode. 1 Press MENU. Press t or 4 to select "CH SETUP", then press ENTER. MENU CD SETUP ( t ) ena ( ) MENU • TIMER REC SET *TV SET-UP -I CH SET-UP *AUTO REPEAT ON IPOFff I SYSTEM SET-UP CJ) (A/VENTER/MENU) 2 Press t or 4 to select "TV/CATV". /CH SET-UP -I TV I.CATV *IAAUDTOO/DECLHETMEEMORY (AMtENTER/MENU) 3 Press ENTER to select the "TV" or "CATV". The arrow indicates the selected mode. TV - VHF/UHF channels CATV - CABLE TV channels /CH SET-UP I loTV CAN *AUTO CH MEMORY I ADO/DELETE (AMENTER/MENU) 1 Press MENU. Press t or 4 to select "CH SETUP", then press ENTER. MENU =SETUP C t ) µ,a L . CT) MENU II TIMER REG SET *N SET-UP - I CH SET-UP l'AUTO REPEAT ON OOFF I SYSTEM SET-UP (AJT/ENTER/MENU) 2 Press t or 4 to select "AUTO CH MEMORY". Cr) CH SET-UP 4IATV CAN 4 1X0Vat iEMCIRY L1_) (A/v/ENTERNENO 3 Then press ENTER. The unit will begin memorizing all the channels available in your area. Channel numbers will remain red until auto memorizing is complete. AUTO CH 002 . 4 Press MENU repeatedly until the menu screen is cleared. MENU = SETUP 4 Press MENU repeatedly until the MENU screen is cleared. MENU = SETUP Notes: • If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes. • You can't select "CH SET-UP" if you set the channel to "LINE1" or "LINE2". 26