Toshiba MW24FM3 Owners Manual - Page 41
Tyner, recording
View all Toshiba MW24FM3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
r- Tyner recording Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. TVNCR 2 3, 5 6 (WA) Buipiooeu 1 3, 5 CANCEL Timer recording Preparation: • Press TVNCR to select the TVNCR mode. • Load a cassette tape with the erase prevention tab intact. • Check the time and date are correct 122). Example: Program a timer recording for 23rd day, channel 125 (CATV), 7:00 - 9:30 PM (Tape speed : SLP). 1 Press MENU. Press t or 4 to select "TIMER REC SET", then press ENTER. MENU = SETUP . ( ) \ AiENU - I TIMER REC SET *TV SET-UP I CH SET-LP I AUTO REPEAT ON 4OfF I SYSTEM SET-UP (AtWENTERIMENU) 2 Press t or 4 to select one of the program line, then press ENTER. \ 1 I / /^ ( ) (AMENTERIC CEUMENU) 3 Press t or 4 to select the date, then press ENTER. TIMER REC SET Cf ) ( ) ( 0 ) DATE START END O4 SPEED -8- 30 A 012 SP (1./ENTER/CANCEL/MENU) 4 Set the start time, end time, channel and tape speed as in step 3. TIMER REC SET DATE NAT 923:(T010414.1 END 8:30PM CH Of SPEED -9Lk,44 (4,4/ENTER/CANCEL/MENU) Notes: • Press CANCEL to move cursor backward for correction. • To record from external source set the channel to "L1" or "L2". "L1" or "L2" will appear next to CH 125 (or 69). 5 To set the timer for another program, press t or 4 until the number of the second program blinks, then press ENTER. Repeat steps 2 to 4 to set the second program. (t ) ( ) '23124 $4:00NM 9430P/8 12gSLP ( 4 ) (mIENTERICANCEUMENU) 6 Press both TIMER REC at the same time. The TIMER REC indicator will light. The Timer is programed, when the programed time is reached, the recording is automatically started. TIMER TIVy 5EC To cancel timer recording, press both the buttons again and TIMER REC i' indicator will go out. Notes: • The VCR section cannot be used while the TIMER REC indicator is lit. If you want to use the VCR operation, press both TIMER REC buttons at the same time to deactivate the timer. • When the clock is not set, you cannot select "TIMER REC". In this case, set the clock (see pages 20-22). • After a power failure or disconnection of the power plug, all programmed recording setting and time display will be lost upon resumption of power. In this case, reset the clock (see pages 20-22) and reprogram any timer recordings. • If you want to correct the digits while setting, press the CANCEL button until the item you want to correct, then press t or 4 to correct the desired setting. • If programming is performed without a tape in the unit, or with a tape without an erase prevention tab, the Timer Recording is not possible. If a tape without an erase prevention tab is in the unit, the tape will be ejected. 43