Toshiba MW24FM3 Owners Manual - Page 69
Symptoms, Cause, Possible, Solutions, Remote, Control
View all Toshiba MW24FM3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
SYMPTOMS CAUSE POSSIBLE SOLUTIONS PAG VCR TV recording does not work. Timer recording does not work. Noise bars appear on the screen. The video cassette's erase prevention tab is broken off. The time is not set correctly. The recording start/end time is not set correctly. The TIMER REC buttons have not been pressed at the same time (the TIMER REC indicator is not lit). Tape is old or worn. Tracking adjustment is beyond range of automatic tracking circuit. Video heads are dirty. DVD The playback picture has occasional distortion. The disc is dirty. It is in fast forward or fast reverse playback. No disc is inserted. An unplayable disc is inserted. The unit does not start playback. The disc is placed upside down. The disc is not placed within the guide. The disc is dirty. The parental lock function is set. Playback does not follow the It is in the mode of repeat playback, course of the disc's program memory playback, etc. Place a piece of adhesive tape over the hole. Reset the present time. Reset the start/end time. 35 20-22 43 Press the TIMER REC buttons at the same time (the TIMER REC indicator 43 is lit). Replace the tape. - Adjust tracking manually using the TRK +1- buttons on the remote control. 37 Clean the video heads. 39 Eject the disc and clean it. Some times a small amount of picture distortion may appear. This is not a malfunction. Insert a disc. Insert a playable disc (Check the disc type and color system). Place the disc with the playback side down. Place the disc correctly inside the guide on the disc tray. Clean the disc. Cancel the parental lock function or change the parental lock level. These operations may prevent a proper progress of the contents. 7 - 48 8 48 48 7 62, 66 - 0 appears on the screen. The function is prohibited with the unit or - the disc. REMOTE CONTROL - O Remote control does not operate. The remote control is not aimed at the sensor. Distance is too far or too much light in the room. There is an obstacle in the path of the beam. The batteries are weak. The batteries are not inserted correctly. Aim the remote control at the remote sensor. Operate within 7 m or reduce the light of the room. Clear the path of the beam. Replace the batteries. Insert correctly. 13 13 13 13 13i 71