Toshiba RDXS32 Owners Manual - Page 14

Introduction Index to Parts and Controls (Continued) Rear Panel 1 2 34 5 6 RF IN (FROM ANT.) RF OUT (TO TV) VHF / UHF Y PB PR COMPONENT OUTPUT R INPUT1 L VIDEO S-VIDEO DIGITAL AUDIO OUTPUT BITSTREAM/PCM VIDEO R L S-VIDEO OUTPUT1 INPUT3 CHANNEL CHANGE IR R L VIDEO S-VIDEO COAXIAL OPTICAL R OUTPUT2 L VIDEO S-VIDEO 7 1 AC IN socket page 15 in "INSTALLATION GUIDE" Connects to the supplied power cord. 2 Ventilation fan 8 9 10 7 CHANNEL CHANGE IR jack page 19 in "INSTALLATION GUIDE" Connect the supplied IR control cable to control cable/satellite channels according to timer programs. 3 VHF/UHF RF IN (FROM ANT.) input socket page 14 in "INSTALLATION GUIDE" Connects to an antenna or cable signal. 4 VHF/UHF RF OUT (TO TV) output socket page 14 in "INSTALLATION GUIDE" Connects the supplied coaxial cable to a TV. 5 INPUT1/INPUT3 jacks page 37 Use this to connect the recorder to output jacks of external devices such as another player or camcorder. 6 COMPONENT OUTPUT jacks page 20 in "INSTALLATION GUIDE" Ouptuts video signals to a connected TV or monitor. Connects to a TV or monitor equipped with component video jacks. 8 DIGITAL AUDIO OUTPUT BITSTREAM/PCM COAXIAL jack page 22, 23, 24 in "INSTALLATION GUIDE" Use this to connect the recorder to an audio receiver equipped with a coaxial digital audio input jack. 9 DIGITAL AUDIO OUTPUT BITSTREAM/PCM OPTICAL jack page 22, 23, 24 in "INSTALLATION GUIDE" Use this to connect the recorder to an audio receiver equipped with an optical digital audio input jack. When connecting the optical digital cable, remove the cap and fit the connector into the jack firmly. When not using the jack, keep the cap inserted to protect it from dust intrusion. 14