Toshiba SD-V392 User Manual - Page 68

Others Troubleshooting Check the following guide for the possible cause of a problem before contacting service. SYMPTOMS POSSIBLE SOLUTIONS DVD/VCR DVD/VCR does not operate. No picture. No sound. The remote control does not function. • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. • Select the DVD or VCR mode before operating. • Antenna connection is not correct or antenna cable is disconnected. • The video channel is not in the correct position or the TV is not set to the video channel 3 or 4. • Check the unit is connected correctly. • The video input selector of the TV is not set to VIDEO. Set to VIDEO (or equivalent). • Channel is set to the external mode. • Check the unit is connected correctly. • Check the input selector of the amplifier is set properly. • The unit is in the Special playback mode. • Aim the remote control at the remote sensor. • Operate within Approx. 7 Meters or reduce the light in the room. • Clear the path of the beam. • The batteries are weak. Replace the batteries. • Check the batteries are inserted correctly. No CATV reception. • Check all CATV connections. • Station or CATV system problems, try another station. VCR TV recording does not work. • The erase prevention tab of the video cassette is broken off. • The unit is in the external input mode. Timer recording does not work. Noise bars on screen. • The time is not set correctly. • The recording start/end time is not set correctly. • The TIMER REC has not been pressed ( is not lit). • Tracking adjustment beyond range of automatic tracking circuit. Try Manual tracking adjustment. • Video heads are dirty. • The tape is worn or damaged. DVD Display is not shown in your language. • Select proper language in the menu options. Playback doesn't start. • No disc is inserted. • The disc may be dirty. Clean up the disc. • The unit cannot play DVD-ROMs, etc. Stopping playback, slow-motion play, repeat play, or memory play, etc. cannot be • Some discs may not do some of the functions. performed. PAGE 5 - - 5 30,42 14~17 22 14~19 - - 14~19 - 31,44 13 16,17 29,34 24 37 37 31 31 - 64 42 6 8 - No picture, or the screen is blurred or divided • The S-VIDEO/COMPONENT selector is not set correctly. • The PROGRESSIVE scan is On through the unit is connected to a TV into two parts. via the VIDEO OUT or the S-VIDEO OUT jack. No 4:3 (16:9) picture. • The setup does not match your TV. No on-screen display. No surround sound. • Select Display "On". • The setup does not match your stereo system. The unit or remote operation key is not functioning. Playback does not start when the title is selected. • Turn off the unit and unplug the AC power cord for several minutes, then replug it. • Check the Parental setup. Audio soundtrack and/or subtitle language is not changed when you play back a DVD. • Multilingual language is not recorded on the DVD disc. No subtitle. • Some discs have no subtitles. • Subtitles are cleared. Press SUB TITLE. Angle cannot be changed. • Multi-angles are not recorded on the DVD disc. 19 66 58 59 20 - 61,62 65 56 54 appears on the screen. • The function is prohibited with the unit or the disc. 44 68 2C53301C (E)p68-BACK 68 12/2/04, 2:32 PM