Toshiba TDP-P75 User Manual - Page 19

English Preparing and using the remote control Q Loading dry-cell batteries into the remote control 1. Remove the battery cover. Q Operating the remote control Point the remote control toward the projectorfs infrared remote sensor, and press a button on the remote control. • Operating the projector from the front 2. Insert the dry-cell batteries. Be sure to align the plus and minus ends of the batteries properly. Approx. 15° Approx. 5 m INPUT 3. Replace the battery cover. (1) (2) • Operating the projector from the rear Approx. 15° Approx. 5 m INPUT Dry-cell batteries • Remove batteries from remote control when not using for extended periods. • If the remote control stops working, or if its range decreases, replace all the batteries with new ones. The remote control • The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or fluorescent lighting. • Do not drop or bang. • Do not leave in hot or humid locations. • Do not get wet or place on top of wet objects. • Do not take apart. • In rare cases, ambient conditions could impede the operation of the remote control. If this happens, point the remote control at the main unit again, and repeat the operation. Overview 19